JVC LVT0853-009B 사용자 설명서

• If you are having a problem with your System, check this 

list for a possible solution before calling for service.

• If you cannot solve the problem from the hints given 

here, or the System has been physically damaged, call a 
qualified person, such as your dealer, for service.

No sound is heard.

• Connections are incorrect, or loose.

• Headphones are connected.

• Check all connections and make 

corrections. (See pages 4 to 8.)

• Disconnect the headphones.

Poor radio reception

• The antenna is disconnected.
• The AM Loop Antenna is too close to the 

System.

• The FM Wire Antenna is not properly 

extended and positioned.

• Reconnect the antenna securely.
• Change the position and direction of the 

AM Loop Antenna.

• Extend FM Wire Antenna to the best 

reception position.

The CD skips.

The CD is dirty or scratched.

Clean or replace the CD.

The CD does not play.

The CD is upside down.

Put the CD in with the label side up.

Unable to operate the Remote Control.

• The path between the Remote Control 

and the sensor on the Unit is blocked.

• The batteries have lost their charge.

• Remove the obstruction.

• Replace the batteries.

Operations are disabled.

The built-in microprocessor has 
malfunctioned due to external electrical 
interference.

Unplug the System then plug it back in.

“CD NO DISC” appears.

There is no disc loaded.

Insert a disc.

“CANNOT PLAY” or “UNFINALIZ” 
appears.

• The CD-R or CD-RW that hasn’t yet been 

finalized (including blank discs) has been 
inserted.

• The disc has been inserted with its label 

side down.

• Insert a CD-R or CD-RW that has been 

finalized.

• Remove the disc and insert it with the 

label side front or up. (See page 20.)

The characters and symbols on the display 
appear upside down.

The DISP.SET switch on the rear panel of 
the Center Unit has not been set correctly.

Set the DISP.SET switch correctly. (See 
page 10.)

VS-DT6-7-9R[B].book  Page 28  Friday, March 15, 2002  6:42 PM