JVC LVT2110-022A 전단

This System can play back...

Audio CD.
CD-R/CD-RW recorded in audio CD format (CD-DA) or recorded MP3/WMA 
files in ISO 9660 format.
USB mass storage class device containing MP3/WMA files.
When playing back an MP3 or WMA track, MP3 or WMA indicator lights up.

NOTE:
When using an 8 cm disc, 
place it on the inner circle of 
the disc tray.

Current track number and elapsed playing time appear.
During playback, press again to pause.

You can connect a USB mass storage class device such as a USB flash 
memory device, MP3 player, multimedia card reader, etc. to the System.

USB memory 
(not supplied)

Current track number and elapsed playing time appear.
During playback, press again to pause.

Always set volume to the minimum level when connecting or 
disconnecting the USB mass storage class device.
When connecting with a USB cable, use the USB 2.0 cable whose length is 
less than 1 m.
You cannot connect a computer to the USB MEMORY terminal of the 
System.
Do not disconnect the USB mass storage class device while playing back a 
file. It may cause malfunction of both this System and the device.
Electrostatic shock at connecting a USB device may cause abnormal 
playback of the device. In this case, disconnect the USB device then reset 
this unit and the USB device.

–
–

–
•

•
•

•
•

•

•

•

•

•

Pressing one of the source buttons also turns on the System and starts 
playing back if the source is ready or connected.

This System cannot play “packet write” discs.
For MP3/WMA playback...

In this manual, “file” and “track” are interchangeably used for MP3/WMA 
operations.
MP3/WMA discs are required a longer readout time than regular CDs. (It 
depends on the complexity of the group/file configuration.)
Some MP3/WMA files cannot be played back and will be skipped. This 
result from their recording processes and conditions.
When making MP3/WMA discs, use ISO 9660 Level 1 or Level 2 for the disc 
format.
This System can play back MP3/WMA files with the extension code <.mp3> 
or <.wma> (regardless of the letter case—upper/lower).
It is recommended that you make each MP3/WMA file at a sampling rate 
of 44.1 kHz and at bit rate of 128 kbps. This System cannot play back files 
made at bit rate of less than 64 kbps.
Playback order of MP3/WMA tracks may be different from the one you have 
intended while recording. If a folder (group) does not include MP3/WMA 
tracks, they are ignored.
Some characters or symbols will not be shown correctly on the display.
The maximum character number shown on the display is 30 for ID3 tag.
This System can recognize a total of 999 tracks and 255 groups. Those 
exceeding the maximum number cannot be recognized.

For the USB mass storage class device playback...

When connecting a USB mass storage class device, also refer to its manual.
Connect one USB mass storage class device directly to the System at a time. 
Do not use a USB hub.
This System is compatible with USB 2.0 Full Speed.
You cannot play back a file larger than 2 GB.
This System may not play back some USB mass storage class devices and 
does not support DRM (Digital Rights Management).

•

•
•

–

–

–

–

–

–

–

–

–

•

–
–

–
–
–

Coded or encrypted tracks in a special method cannot be played on the 
System.
This System cannot recognize a USB mass storage class device whose rating 
exceeds 5 V/500 mA.
When playing a file which has a large transfer rate, sounds may be dropped 
during playback.
Some USB mass storage class devices may not be recognized or may not 
work properly.
The compatible format is FAT16/FAT32.
JVC bears no responsibility for any loss of data in the USB mass storage 
class device while using this System.

USB mass storage class device is charged through the USB MEMORY terminal 
when the System is turn on. (Some USB mass storage class device may be 
charged through the USB terminal only when “USB” is selected as the source.)

If the audio output on the other equipment is not stereo mini plug type, use 
a plug adapter to convert the stereo mini plug to the corresponding plug of 
the audio output.
Refer to the manuals supplied with the other equipment.

You can set the clock and Daily Timer while the System is turned on. While 
setting the clock or Daily Timer, the display is turning on.
The clock may gain or lose 1 to 2 minutes per month. If this happens, readjust 
the clock.
When you unplug the AC power cord or if a power failure occurs, the clock 
and the timer will be canceled. You need to set the clock first, then the timer 
again.

Timer Priority:

If you activate the Sleep Timer after Daily Timer starts playing the selected 
source, Daily Timer is canceled.

–

–

–

–

–
–

•

•

•

•

•

•

While playback is stopped, total track number and total playing time (for 
MP3/WMA files, group number and track number) appear.

RESUME Play
Press RESUME to activate RESUME Play so that the RESUME indicator 
lights up.
When you stop the playback by one of the following operations, 
“RESUME” appears and this System stores the beginning of the stopped 
track on the disc or USB mass storage class device.

Pressing 

7 once

Changing the source

When you start playback again, playback starts from the beginning of 
the stopped track.
To clear the memory, open the disc tray, disconnect the USB mass 
storage class device or press 

7 twice.

When you clear the memory and start playback, playback starts from 
the first track.

To deactivate RESUME Play, press RESUME again.

–
–

•

Select the next tracks.

To go back to the beginning of the current or previous tracks.

Select the next groups.

Select the previous groups.

Press and hold to fast-forward the track during playback.
To stop searching, release the button.

Press to fast-forward the track during playback.
To stop searching, press 

6.

Press and hold to fast-reverse the track during playback.
To stop searching, release the button.

Press to fast-reverse the track during playback.
To stop searching, press 

6.

If no disc is inserted or no USB mass storage class device is connected, 
“NO DISC” or “NO USB” appears on the main display.
If MP3/WMA files are not recorded on the disc or in the USB mass storage 
class device, “NO PLAY” or “NO DATA” appears on the main display.

•

•

or

If you try to program a 33rd track, “PRG FULL” will appear.

or

To check the programmed contents, press SET repeatedly.
To add tracks, repeat steps 2 and 3 above.
To erase or exit the program, press 

7.

The stored program is not kept.

1:

Repeats the current (or specified) track.

:

Repeats all tracks in the current group 
(MP3/WMA only).

ALL:

Repeats all tracks.

No indicator (Off ): Normal playback

or

•

•
•
•

–

To skip a track, press 

¢.

To go back to the beginning of the current track, press 

4.

To exit from random play, press RANDOM so that the RND (random) 
indicator disappears during playback.

You can lock the disc tray so that no one can eject the loaded disc while the 
System is on standby.

To cancel the prohibition, repeat the same procedure. 

•
•
•

•

You can preset 30 FM and 15 AM stations manually.

Finish the following steps while the indication on the display is flashing.

or

or

•

7.

Each time you press and hold, you can select “9K 

= 10K” or “10K = 9K”.

or

The System starts searching for stations and stops when a station of 
sufficient signal strength is tuned in.

If an FM program is broadcast in stereo, the 

 (stereo) indicator lights up 

(only when the reception is good).
Press during searching to stop.
Press repeatedly to change the frequency step by step.

The 

 (mono) indicator lights up.

Stereo effect will be lost.
To restore the stereo effect, press again. 

•

•

•
•

•
•
•

To Adjust the Audio Input Level
If the sound from the other equipment connected to the AUDIO IN jack is 
too loud or too quiet, you can change the audio input level through the 
AUDIO IN jack (without changing the volume level).

As the number increases, the sound becomes louder.

•

Remote sensor

STANDBY lamp

Headphones 

(not supplied)

Using Headphones
Be sure to turn down the volume before connecting or putting on the 
headphones.

Connecting the headphones will deactivate the speakers.
Sound adjustments also affect the sound through the headphones.

NOTE:
DO NOT turn off (standby) the System with the volume set to an 
extremely high level; otherwise, the sudden blast of sound can damage 
your hearing, speakers and headphones when you turn on the System or 
start playback.

•
•

Stereo mini plug cord 
(not supplied)

1   Turn on or off 

the power

2   Select a 

source

3   Adjust the 

volume

3   Adjust the 

volume

1   Turn on or off 

the power

2   Select a 

source

Digital Audio Player

Illustrations shown in this manual depict the UX-G375.

EN2_UX-G375_[UW].indd   2

EN2_UX-G375_[UW].indd   2

3/8/2010   10:17:57 AM

3/8/2010   10:17:57 AM