Panasonic SA-XR50 사용자 설명서
22
Oper
ations
RQT74
92
Advanced setup
You can adjust the settings to match the setup environment and performance of the connected speakers.
Multi control advanced setup settings
Enter Multi
control mode
control mode
SPEAKERS
Set the size to suit your speakers.
LARGE:
LARGE:
For speakers that can reproduce a full
sound range, particularly the bass range
below 100 Hz.
sound range, particularly the bass range
below 100 Hz.
SMALL:
For speakers that cannot adequately
reproduce the bass range. This setting is
sufficient for most speakers if you are
using a subwoofer.
reproduce the bass range. This setting is
sufficient for most speakers if you are
using a subwoofer.
NONE:
For speakers you haven’t connected
(center or surround).
(center or surround).
For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.
Main menu is displayed.
(Multi control mode menus
and factory settings á back
cover)
(Multi control mode menus
and factory settings á back
cover)
1. Select.
2. Select the
speaker.
3. Change the
setting.
Select
“SETUP 2
(ADVANCE
SETUP)”.
“SETUP 2
(ADVANCE
SETUP)”.
Switching
Entering
Change the
settings.
settings.
DISTANCE
Enter the distance of the front, center and
surround speakers from the seating
position.
By setting the distance between the
speaker’s position (except the subwoofer)
and the listeners seating position, the
sound delay time is automatically adjusted
so that sound reaches the listener at the
same time. You can select distances
between 1.0 and 10.0 m at 0.1-meter
intervals.
surround speakers from the seating
position.
By setting the distance between the
speaker’s position (except the subwoofer)
and the listeners seating position, the
sound delay time is automatically adjusted
so that sound reaches the listener at the
same time. You can select distances
between 1.0 and 10.0 m at 0.1-meter
intervals.
1. Select.
2. Select the
speaker.
3. Change the
setting.
FILTER
1. Select.
2. Change the
setting.
Change the cut-off for bass output from the
front speakers.
If you set the front speakers to “SMALL”, the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front speakers is
unsatisfactory so that this bass is output
through the subwoofer.
You can raise the cut-off from 100 Hz to
either 150 Hz or 200 Hz.
front speakers.
If you set the front speakers to “SMALL”, the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front speakers is
unsatisfactory so that this bass is output
through the subwoofer.
You can raise the cut-off from 100 Hz to
either 150 Hz or 200 Hz.
To finish settings
1. Press [MULTI CONTROL]
several times to select
“EXIT”.
“EXIT”.
2. Press [INPUT SELECTOR].
SPEAKERS
A
B
8
6.1CH DECODING
VIDEO IN
AUDIO IN
L
R
VCR 2
PHONES
^
MULTI CONTROL
INPUT SELECTOR
VOLUME
DOWN
UP
PUSH ENTER
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
MULTI CONTROL
1
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
INPUT SELECTOR
SPEAKERS
INPUT SELECTOR
INPUT SELECTOR
FRONT
FRONT, CENTER,
SURROUND,
SUR BACK, SUB-WFR
INPUT SELECTOR
INPUT SELECTOR
SMALL
NONE, SMALL, LARGE
NO, YES
2
INPUT SELECTOR
INPUT SELECTOR
SETUP 2
3
• To cancel
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
INPUT SELECTOR
DISTANCE
INPUT SELECTOR
INPUT SELECTOR
FRONT
FRONT, CENTER,
SURROUND,
SUR BACK
INPUT SELECTOR
INPUT SELECTOR
3.0
m
1.0 m
10.0 m
INPUT SELECTOR
INPUT SELECTOR
FILTER
INPUT SELECTOR
INPUT SELECTOR
100
100, 150, 200