Philips MCI900/12 사용자 설명서

32 EN

2

  Press BACK on the remote control to 

stop getting auto IP.

 

 

Get the IP address of the router 

Consult the user manual of the router.

• 

Or, to check for the settings of the router, 

• 

enter the IP address (e.g. 192.168.1.1) in 

the web browser (e.g. Internet Explorer) 

of the computer, and then, get the 

desired information in the setup page.

Enter the IP address manually

On the 

• 

MCi900, enter an IP address that 

allows the unit to be in the same subnet 

as the router.

For example, if the router has 

IP address: 192.168.1.1, Subnet mask: 

255.255.255.000;

Then, enter the following on the unit: 

IP address: 192.168.1.XX (where XX 

denotes a number), Subnet mask: 

255.255.255.000. 

Acquiring IP address...

Press <Back> to enter 

IP address manually

 

Tip

If you have hidden the SSID of the router (e.g. 

 

•

disable the SSID broadcasting), go to the end 

of the list of Wi-Fi network. Select [Other...] 

> [Manual SSID entry]. In the text box, enter 

the name of the router. 

Note

The router may fail to assign an IP address, 

 

•

if the DHCP (Dynamic Host Configuration 

Protocol) is unavailable or disabled on the 

router. You may need to enter the IP address 

manually, or press BACK to start re-

connecting. 

Wireless connection: Enter IP address 

manually

 

Stop getting Auto IP

1

  Search for the home Wi-Fi network,

and then, connect to the home Wi-Fi 

network. 

The unit starts to acquire an IP 

 

»

address assigned by the Wi-Fi network 

automatically.

Successfully 

connected to 

Network A

MCi900