Philips FW 326 사용자 설명서

20

3139 116 17531

• The system can switch on to CD or TUNER mode

automatically at a preset time. It can serve as an
alarm to wake you up. After half an hour from the
preset time, the system will return to the standby
mode if no button is pressed.

• Before setting the timer, make sure the clock is set

correctly.

• The timer has to be reset or start again for each

subsequent preset time.

1 Press and hold CLOCK•TIMER for more than 2

seconds to select timer mode.
™ “ON 00:00” or the last set timer starts flashing.

The TIMER flag flashes.

™ The last selected source is lighted while other

available sources are flashing.

™ “à , á , í , ë, Ç” light up (for models

FW325 and FW326 only).

2 Press CD or TUNER  to select the desired source.
3 Press à or á to set the hour for the timer to start.
4 Press í or ë to set the minute for the timer to

start.

5 Press CLOCK•TIMER to store the start time.

™ The TIMER is now set.
™ The TIMER flag remains on the display.

• To exit without storing the setting, press STOP Ç.

• At the preset time, the TIMER will be activated.

™ The selected source will be played.
™ The TIMER flag disappears from the display.

Notes:
– During timer setting,  if no button is pressed within 90

seconds, the system will exit timer setting mode
automatically.

– If the source selected is TUNER, the last tuned

frequency will be switched on.

– If the source selected is CD, the first track of the disc

will be played. If the CD tray is empty, the TUNER
source will be selected instead.

To cancel the TIMER
1 Press CLOCK•TIMER for more than 2 seconds.
2 Press PAUSE Å  to cancel the timer.

™ “CANCEL” will be displayed.
™ The TIMER flag disappears from the display.

(for the same time)

1 Press CLOCK•TIMER for more than 2 seconds.
2 Press CLOCK•TIMER again to store the start time

and the selected source.

MINI HIFI SYSTEM

n

CLOCK
 

 PROGRAM

▲

▲

▲ ▲

▲

▲

pg 01-22/FW326/22-Eng

12/9/98, 15:54

20