Aiwa LCX-107 사용자 설명서
9
En
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution.
Do not use strong solvents such as alcohol, benzine or thinner.
Use a soft cloth lightly moistened with mild detergent solution.
Do not use strong solvents such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
- high frequency sound is not emitted
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a head
cleaning cassette.
Use separately sold dry-type or wet-type cleaning cassette.
Refer to the instructions of the cleaning cassette for details.
When the tape heads are dirty;
- high frequency sound is not emitted
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a head
cleaning cassette.
Use separately sold dry-type or wet-type cleaning cassette.
Refer to the instructions of the cleaning cassette for details.
To clean the lens
Use a cotton swab slightly moistened with cleaning fluid. Wipe
gently from the center to the edge.
Use a cotton swab slightly moistened with cleaning fluid. Wipe
gently from the center to the edge.
If an erroneous display or malfunction occurs
Make sure that none of the deck operation buttons is pressed.
Press s while pressing POWER6STANDBY.
If the unit cannot be reset in the way above, disconnect the
AC cord to turn off the display.
Leave the unit for a while and turn the power back on.
Make sure that none of the deck operation buttons is pressed.
Press s while pressing POWER6STANDBY.
If the unit cannot be reset in the way above, disconnect the
AC cord to turn off the display.
Leave the unit for a while and turn the power back on.
Specifications
Tuner
FM
FM
Tuning range
87.5 - 108.0 MHz
Usable sensitivity (IHF)
13.2 dBf
Antenna terminals
75 ohms (unbalanced)
AM
Tuning range
530/531 - 1,710/1,602 kHz
(10/9 kHz step)
(10/9 kHz step)
Usable sensitivity
350 µV/m
Antenna
Loop antenna
Tape deck
Track format
4 tracks, 2 channels
Frequency response
Normal tape: 50 - 12,500 Hz (EIAJ)
Recording system
AC bias
Erasing system
Magnet erase
Heads
Recording/playback head (1)
Erasure head (1)
Erasure head (1)
CD player
Wow and flutter
Unmeasurable
Scanning method
Non-contact optical scanner
(semiconductor laser)
(semiconductor laser)
Amplifier
Power output
1.9 W + 1.9 W (65 Hz to 15 kHz,
THD less than 1%, 7 ohms)
2.5 W + 2.5 W (1 kHz, THD 10%, 7
ohms)
THD less than 1%, 7 ohms)
2.5 W + 2.5 W (1 kHz, THD 10%, 7
ohms)
Input
AUX (400 mV)
Output
SPEAKERS: 7 ohms or more
PHONES: Stereo mini-jack
PHONES: Stereo mini-jack
General (Main unit)
Power requirements
AC 120 V, 60 Hz
Power consumption
20 W
Dimensions (W x H x D)
146 x 216 x 206 mm
(5
(5
3
/
4
x 8
5
/
8
x 8
1
/
8
in.)
Weight
2.1 kg (4 lb. 10 oz.)
Accessories
Remote control, FM antenna,
AM LOOP antenna
AM LOOP antenna
Speaker
Speakers
100 mm cone type, 7 ohms
Dimensions (W x H x D)
130 x 214 x 191 mm
(5
(5
1
/
8
x 8
1
/
2
x 7
5
/
8
in.)
Weight
0.85 kg (1 lb. 14 oz.)
Specifications and external appearance are subject to change
without notice.
without notice.
COPYRIGHT
Please check the copyright laws relating to recordings from
disc, radio or external tape for the country in which the
machine is being used.
Please check the copyright laws relating to recordings from
disc, radio or external tape for the country in which the
machine is being used.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a screwdriver
or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Break off the plastic tabs on the cassette tape with a screwdriver
or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Tab for side A
Side A
LCX-107 (U) Eng
11/21/00, 10:26 AM
9