Panasonic SC-VKX25 사용자 설명서

21

RQT9952

1

  The original language designated on the disc is 

selected.

2

  Input the applicable code from the “Language code 

list” (Z 23).

3

  If the language selection for “AUDIO” is not available 

for the disc played, the subtitles in that language will 
be shown (if available on the disc).

 “VIDEO” menu

 TV ASPECT
Change the setting to suit your TV and preference.
16:9: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture 
are cut off so it fills the screen (unless 
prohibited by the disc).

4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the 
letterbox style.

TIME DELAY
When connected with an AV amplifier and Plasma TV, 
adjust if the audio is out of sync with the video.
0 ms 

20 ms 

40 ms 

60 ms 

80 ms 

100 ms

 NTSC DISC OUT
Change PAL 60 or NTSC output when you play NTSC 
discs.
NTSC: 

 

Output signals from NTSC discs remains as 
NTSC.

PAL60: NTSC discs can be viewed on PAL TV.

For the Middle East and South Africa

“PAL60” is the factory preset.

 STILL MODE
Specify the type of picture shown when in pause 
mode.
AUTO
FIELD: 

 

The picture is not blurred, but the picture 
quality is lowered.

FRAME:  

 

Overall quality is high, but the picture is 
blurred.

 “AUDIO” menu

DOLBY DIGITAL 



BITSTREAM
PCM

DTS 



BITSTREAM
PCM

For the Middle East and South Africa

MPEG



BITSTREAM
PCM



Select “BITSTREAM” when the equipment can 
decode the bitstream (digital form of multi-channel 
data). If not, select “PCM”. (If the bitstream output to 
the equipment without a decoder, there can be high 
levels of noise output that can do damage to your 
speakers and hearing.)

DYNAMIC RANGE
ON:  Adjust for clarity even when the volume is low. 

The range between the lowest and the highest 
sound levels is compressed. Convenient for late 
night viewing. (Only works with Dolby Digital.)

OFF

“DISPLAY” menu

LANGUAGE
Select the language for the on-screen messages.
ENGLISH FRANÇAIS  ESPAÑOL 
PУCCKИЙ

 “OTHERS” menu

SLIDE SHOW TIME
To change the slideshow time.
1 SEC to 15 SEC (in 1-unit)
15 SEC to 60 SEC (in 5-unit)
60 SEC to 180 SEC (in 30-unit)

“3 SEC” is the factory preset. 

EASY SETUP
SET: Shows the EASY SETUP settings.

 DVD-VR/DATA
Select to play only DVD-VR or DATA format.
DVD-VR: To play video on DVD-R/RW.
DATA: To play data files on DVD-R/RW.

SCREEN DIMMER
This is to prevent burnt mark on the TV screen.
OFF
WAIT 5 MIN:  If there is no operation for 5 minutes, the 

picture becomes grey. The TV screen 
will go back to the normal position when 
you do some operations. (This does not 
apply during video playback.)

DEFAULTS
This returns all values in the SETUP menus to the 
default settings.
RESET
The password screen is shown if “RATINGS” 
(Z 20, “RATINGS”) is set. Input the same password 
and then press [OK], then switch off the system and 
switch on again.

SC-VKX25GAGS_RQT9952-B_En.indd   21

SC-VKX25GAGS_RQT9952-B_En.indd   21

8/18/2014   3:36:48 PM

8/18/2014   3:36:48 PM

Confidential 

Until: