Panasonic SC-VKX25 사용자 설명서
27
RQT9952
Remote control code
When other Panasonic equipment responds to the
remote control of this system, change the remote control
code for this system.
remote control of this system, change the remote control
code for this system.
Preparation
Press [RADIO/AUX] to select “AUX 1” or “AUX 2”.
Press [RADIO/AUX] to select “AUX 1” or “AUX 2”.
█ To set the code to “REMOTE 2”
1
Press and hold [RADIO/AUX] on the main unit
and [2] on the remote control until “REMOTE 2”
is shown.
and [2] on the remote control until “REMOTE 2”
is shown.
2
Press and hold [OK] and [2] for a minimum of
4 seconds.
4 seconds.
█ To set the code to “REMOTE 1”
1
Press and hold [RADIO/AUX] on the main unit
and [1] on the remote control until “REMOTE 1” is
shown.
and [1] on the remote control until “REMOTE 1” is
shown.
2
Press and hold [OK] and [1] for a minimum of
4 seconds.
4 seconds.
Note:
After you set the code, you can continue to use the TV
operation buttons on the remote control to operate a
Panasonic TV (Z 9).
After you set the code, you can continue to use the TV
operation buttons on the remote control to operate a
Panasonic TV (Z 9).
System memory reset
Reset the memory when the following situations occur:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
1
Disconnect the AC mains lead.
2
While you press and hold [1] on the main unit,
connect the AC mains lead again.
Continue to press and hold the button until
“– – – – – – – –” is shown.
connect the AC mains lead again.
Continue to press and hold the button until
“– – – – – – – –” is shown.
3
Release [1].
All the settings are set back to the factory preset. It is
necessary to set the memory items again.
All the settings are set back to the factory preset. It is
necessary to set the memory items again.
Specifications
█ Amplifier section
RMS output power stereo mode
Front Ch
175 W per channel (4 ), 1 kHz
Total RMS stereo mode power
350 W (30% THD)
PMPO output power
3900 W
█ Tuner, terminals section
Preset station
FM 30 stations
AM 15 stations
Frequency modulation (FM)
Frequency
Frequency
range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna
terminals
75 (unbalanced)
Amplitude modulation (AM)
Frequency
Frequency
range
522 kHz to 1629 kHz (9 kHz step)
520 kHz to 1630 kHz (10 kHz step)
AUX 1
Audio input
Pin jack (1 system)
AUX 2
Sensitivity
100 mV, 4.7 k
█ USB section
USB port
USB standard
USB 2.0 full speed
Media file format support
USB AUDIO
MP3 (
*.mp3)
USB VIDEO JPEG (
*.jpg, *.jpeg), Xvid (*.xvid, *.avi)
USB device file system
FAT12, FAT16, FAT32
USB port power
500 mA (max)
Bit rate
Up to 4 Mbps (Xvid)
USB recording
Bit rate
128 kbps
USB recording speed
1x
Recording file format
MP3 (
*.mp3)
█ Bluetooth
®
section
Version Bluetooth
®
Ver. 2.1 + EDR
Class Class
2
Supported profiles
A2DP, AVRCP, SPP
Operating frequency
2.4 GHz band, FH-SS
Operation distance
10 m line of sight
█ Video section
Video system
PAL, NTSC
Composite video output
Output level
1 Vp-p (75 )
Terminal
Pin jack (1 system)
SC-VKX25GAGS_RQT9952-B_En.indd 27
SC-VKX25GAGS_RQT9952-B_En.indd 27
8/18/2014 3:36:49 PM
8/18/2014 3:36:49 PM
printing rev.1
Confidential
Until:
29 Aug 2014