Panasonic SCPTX7 사용자 설명서

RQ

T

8

9

2

6

(Continued on the next page)

≥Are there power cords or fluorescent lights near any connected cords? Keep this 

unit as far away as possible from other electrical devices.

≥Has the LAN cable come unplugged? Check that the LAN cable is properly 

connected.

≥Have you plugged in a modular cable for use with a telephone into the LAN 

terminal on this unit? Connect with a straight LAN cable.

≥Is the power for the modem or broadband router turned on? Turn the power on for 

each device.

≥Have you set the unit to use only the internal CD database? Set “CD database 

Setting” to “Yes” in “Network” menu. 

≥Is there a mistake in the network settings? Follow any instructions you may have 

received from your ISP (Internet Service Provider) and make changes to the 
settings accordingly.

≥Are the broadband router settings correct? Read the operating instructions for the 

broadband router.

≥Is the broadband router and/or modem correctly connected? Check the operating 

instructions for each device and connect accordingly.

≥Does your Internet Service Provider (ISP) or service contract prevent multiple 

terminals connecting at the same time? Check the content and regulations of your 
contract.

You have forgotten your 
ratings password.
Reset all the settings in “Setup 
for Video”  to Factory Preset.

≥Switch the selector to “DVD/CD”, and when the unit is stopped, simultaneously 

press [

∫] on the main unit and [S10] on the remote control until “Initialized” is 

displayed. All settings in “Setup for Video” will return to the default values.

≥Is the unit performing the recording? Perform operations after recording finishes.

≥Check the connection of the HDMI cable.
≥Is “EZ Sync” set to “On” in the  “HDMI” menu?
≥Check the EZ Sync settings on the connected device.
≥If the HDMI device connection was changed, there has been a power failure, or the 

plug was removed and then reinserted to the power outlet, EZ Sync may stop 
working. In any of these cases, perform the steps listed below.
1 Turn on the power to all devices connected with an HDMI cable, and then turn the 

TV (VIERA) off and on again.

2 Turn the EZ Sync settings on the TV(VIERA) to “Off” and then “On” again. (For 

more information, refer to the VIERA operating instructions.)

3 Switch the VIERA input to the HDMI connection with this unit, and after this unit’s 

screen is displayed, check the EZ Sync operations.

≥If it is difficult to find the playlist that a track was added to, search by the name of 

the track. All tracks in the Music Collection will be displayed by track name. 

≥Are you playing the track immediately after recording it? Adding the track to Music 

Shuffle takes place when the unit is in standby mode.

≥Does this abnormality only occur with specific tracks? Depending on the track, it 

may not be added to any genre.

1] (PLAY).

≥Does the inserted disc conform to disc standards and specifications? Replace it 

with a disc that conforms to disc standards.

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

PTX79P.book  Page 101  Monday, April 9, 2007  9:24 AM