Panasonic SCPTX7 사용자 설명서

다운로드
페이지 112
RQ
T
8
9
2
6
38
Recording audio from external devices
You can record audio tracks to the HDD from externally 
connected devices. After recording starts, track data will be 
recorded and divided using the time settings selected before 
the recording starts. Therefore the recording (from start to 
finish) will be made and divided into multiple tracks.
Preparation
1 To display the picture turn on the television and select the 
appropriate video input to suit the connections to this unit.
2 Press  [
Í].
3 Connect the device from which you want to record/play 
(
➜ page 18, 19).
4 Press  [
N SELECT O] to switch the selector.
AUX:
If connected to the AUX terminal
TV Audio:
If connected to the TV IN terminal
≥You cannot record when “TV Audio Input” is set to 
“DIGITAL IN” (
➜ page 83).
MUSIC PORT: If connected to the Music Port terminal
≥When the audio output level of the external device is too 
high, audio may be distorted. Adjust the volume on the 
external device.
1
Press [SUB MENU].
2
Press [
3 4] to select “Auto Track Divide” and press 
[ENTER].
3
Press [
3 4] to select the method of division and 
press [ENTER].
Auto 5 Minutes
:
Tracks are divided into 5-minute 
recordings.
Auto 10 Minutes
: Tracks are divided into 10-minute 
recordings.
Auto Synchro:When external equipment starts playing, 
recording starts automatically. The unit 
searches for silence in between tracks, 
and when a break of 3 seconds or longer 
is found, recording pauses (the track is 
divided) and will restart again when audio 
is found.
Manual: Divide tracks at the point you like. (For division 
methods, see below.)
4
Press [RETURN].
5
Press [
¥ HDD REC].
Auto 5 Minutes, Auto 10 Minutes,
 Manual:
Recording starts.
Auto Synchro:
Unit enters recording standby mode.
6
Starting play on an external device.
Auto Synchro: Recording starts once audio is output.
Titles are automatically added (
➜ page 39).
To change the recording mode before recording
Follow steps 1 to 3 of “Setting the recording mode/recording 
method” on page 34. (The recording method cannot be 
selected.)
To stop recording
Press [
∫].
To pause recording
Press [
¥ HDD REC].
≥To continue recording, press [¥ HDD REC] once more
(The track is divided).
To manually divide tracks
While recording, press [ENTER]
 at the point where you want to 
divide the track.
≥When dividing tracks, create at least a 2-second space 
between two tracks. (Tracks divided with less than 2-second 
of space cannot be divided.)
≥Tracks recorded in “Manual” mode that exceed 60 minutes 
will automatically be divided.
To adjust the synchro level
For synchro recordings, if the recording does not start, or the 
tracks are not divided correctly between tracks, make 
adjustments and record again.
1 Press [SUB MENU].
2 Press  [
3 4] to select “Auto Synchro Level” and press 
[ENTER].
3 Press  [
3 4] to select the level and press [ENTER].
You can make adjustments within a range of 25 levels.
s12 (Low) 
,. 0 (Standard) ,. r12 (High)
≥If the track is quiet, recording may not start. In this case, 
lower the value.
≥If recording from a cassette tape, etc. with a lot of noise, 
tracks may not be divided correctly or recording may not 
start. In this case, raise the value.
ޓ
DI
RE
CT
 N
AV
IG
AT
OR
ONE
 TOUCH PLAY 
S
TA
R
T
ޓ
ޓ
ޓ
TO
P
 M
E
N
U
   
 
HDD
BAND
FUNCTIONS
MENU   PLAYLIST
SELECT
VOLUME
FAVORITE
PLAYMODE
HDDREC
ENERGETIC
RELAXING
MELLOW
MUTING
SETUP
SELECT
SOUND
SLEEP
FL DISPLAY
VS
2ND
EMOTIONAL
REG
SELECT
PLAY
PAUSE
STOP
CH SELECT
CANCEL
SELECT
HDDREC
STOP
CH SELECT
CANCEL
AUX                Sub Menu
LPCM
Auto 10 Minutes
Level0
Recording Mode
Auto Track Divide
Auto Synchro Level
Auto Track Divide
Auto 5 Minutes
Auto 10 Minutes
Auto Synchro
Manual
PTX79P.book  Page 38  Monday, April 9, 2007  9:24 AM