Panasonic SCPTX7 사용자 설명서

RQ

T

8

9

2

6

You can use only the scheduled timer recording that you want 
to use by switching only the desired scheduled timer recording 
to “On”

 

from the list of scheduled timer recording settings.

After completing step 4 on the left column,

3 4 2 1] to select the scheduled timer 

Selected scheduled timer recording day of the week and 
starting time.

3 4] to select “Timer Setup” and press 

3 4] to select “On” and press [ENTER].

When you do not want to use the scheduled settings, 
select

 

“Off”.

On :

Use this scheduled timer recording

Off :  Do not use this scheduled timer recording 

(setting only)

Invalid (Overlap): This scheduled timer recording 

conflicts or overlaps with another 
scheduled timer recording and 
cannot be used.

s (Erase setting): Scheduled timer recording not yet 

set.

The unit returns to the screen shown in step 5.
Repeat steps 5 to 7 and switch each scheduled timer 
recording to “On” (or “Off”).

The unit returns to the previous screen.

Í] to turn off the power.

If the power is not turned off, the timer will not operate.

To return to the previous screen
Press [RETURN].

To change settings of a scheduled timer recording
Select the number of the scheduled timer recording in step 5 
and set again.

[Note]
≥Only radio and externally connected devices can be recorded 

with the scheduled timer recording function

. 

You cannot 

record from a CD or “OPTION” either with this function.

≥To avoid cutting off the beginning of the track that is 

recording, the recording will begin a few seconds before the 
set day of the week and time. (While recording, “

FREC” and 

the number of the scheduled timer recording will flash on the 
television.)

≥All scheduled timer recordings will operate on the specified 

day of the week and time, except for scheduled timer 
recordings indicated as “Off”.

≥If the starting time for the scheduled timer recording occurs at 

the same time as another scheduled timer recording

 

finishes, 

the second recording may start late. 

[Tips]
When a scheduled timer recording overlaps with another 
scheduled timer recording
You cannot record when a scheduled timer recording overlaps 
with another scheduled timer recording. When a timer is 
activated by selecting “On”, other timers that overlap with this 
scheduled recording will then be set to “Invalid (Overlap)” and 
cannot be used. If you want to activate a scheduled timer 
recording that is currently set to “Invalid (Overlap)”, follow the 
steps in the left column to switch the scheduled timer recording 
to “On”. 

To delete unnecessary scheduled timer recording settings
After step 4 on the previous page
1 Press  [

3 4 2 1] to select unnecessary scheduled timer 

recording settings and press [ENTER].

2 Press  [

3 4] to select “Timer Setup” and press [ENTER].

3 Press  [

3 4] to select “s (Erase setting)” and press 

[ENTER].

To play after setting a timer
Even after setting a scheduled timer recording you can play the 
unit as usual. However, after you finish playing, be sure to set 
the unit to standby mode. Scheduled timer recording will not 
record if the unit is turned on.
≥Changing the volume and audio source will have no effect on 

the details of the settings.

If a power failure, etc. caused timers to lose their setting
The clock is reset, and you cannot enter the timer recording 
screen.
Set the clock again (

➜ page 15).

PTX79P.book  Page 85  Monday, April 9, 2007  9:24 AM