Panasonic SCPTX7 사용자 설명서

RQ

T

8

9

2

6

This function will restore the backup data that was saved on 
your PC to this unit.
If the HDD requires service, please wait until the HDD has 

been repaired before restoring the backup to the HDD.

Perform “Preparation” and “Settings to check on the PC” as 
described on page 87.

3 4] to select “Other Setup” and press 

3 4] to select “Maintenance” and press [1].

3 4] to select “Backup/Restore” and press 

3 4] to select “Restore” and press [ENTER].

3 4] to select “PC Name” and press [ENTER].

When the PC name is displayed
The PC name and other information that was used when 
previous backups and imports (

➜ page 40) were 

performed may be displayed. In this case, check the PC 
name again, and if necessary, follow the steps below to 
make changes.

➜ page 69).

Input the “User Name” and “Password” in steps 6 and 7 in 
the same manner.

3 4 2 1] to select “Restore” and press 

[ENTER].
Restore begins.
A message will be displayed, indicating that restore is 
complete. The unit will briefly stay this way, and then it will 
turn off automatically shortly after.

To return to the previous screen
Press [RETURN].

To cancel restore
1 Press and hold [

Í] during restoring.

2 Press  [

2 1] to select “Yes” and press [ENTER].

≥This unit is turned off and the restore is canceled.
≥If restore is canceled before completion, all progress up to 

the point of cancelation will not be recorded and the HDD 
will be completely empty. Restore this unit again later.

[Note]
≥Restore may be canceled if your PC is turned off in an 

irregular manner or is forced to shut down due to errors. In 
this situation, restore again from the beginning. However, 
backups may not restore when the backup data contains 
abnormalities.

PTX79P.book  Page 89  Monday, April 9, 2007  9:24 AM