Panasonic SC-HT820V 사용자 설명서
47
RQT7388
Other speaker setup options
[Note]
≥The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg (22 Ib.) per screw.
Consult a qualified building contractor when attaching the speakers
to wall. Improper attachment may result in damage to the wall and
speakers.
Consult a qualified building contractor when attaching the speakers
to wall. Improper attachment may result in damage to the wall and
speakers.
≥Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
1
Drive a screw (not included) into a
wall.
wall.
2
Fit the speaker securely onto the
screw(s) with the hole(s).
screw(s) with the hole(s).
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lb.).
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lb.).
≥The stands must be stable even if the speakers are in a high
position.
Attaching to a wall
Fitting speaker stands (not included)
30–35 mm (1
3
/
16
q–1
3
/
8
q)
Wall or
pillar
pillar
‰7.5–9.4 mm (
19
/
64
q–
3
/
8
q)
8–11 mm (
3
/
8
q–
7
/
16
q)
Front and surround speakers
Center speaker
150 mm
(5
29
/
32
q)
So that the speaker fits up against the
wall squarely, be sure to press the
speaker cable down into the groove.
wall squarely, be sure to press the
speaker cable down into the groove.
In this position, the speaker will likely fall if
moved to the left or right.
moved to the left or right.
Move the speaker so the screw is in this
position.
position.