Panasonic SC-HT820V 사용자 설명서

RQT7388

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions that 

came with the cloth carefully.

Dirt on the video heads can cause poor recording and play.

To clean the heads, insert and eject a tape 5 to 10 times in 
succession.
If the picture does not improve, use an optional head-cleaning 
cassette (part number NV-TCL30PT). If the problem persists, seek 
advice from a qualified service person.

≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 

≥Check the clock and calendar.

≥Set the channel and start and end times correctly.

≥Be sure to press [F] after programming to put the unit in timer recording standby.

≥Program times may be overlapped.

≥Press [W CH] or [X CH] to Select “AU”.

≥Check the connections to the other equipment. 

≥Move the other equipment away from the television as it may be picking up interference. 

≥This unit complies with industry standards regarding the recording and duplication of copy-

protected material. This includes commercial videotapes and DVDs. Consequently, copying 
not only infringes copyright laws but also presents serious technical difficulties. Even in 
cases where a copy can be made, the quality will be very poor.

≥The DISPLAY setting is set to “DIM” or “OFF” under OPTION from the VHS MENU. Select 

“BRIGHT” if you want the display bright all the time.

≥The tape counter does not change while playing unrecorded parts. 

≥The display also appears like this if the tape is dirty or damaged. Consult your dealer if this 

is the case. 

≥You inserted a disc the unit cannot play; insert one it can.

≥You inserted a blank disc.

≥You haven’t inserted a disc; insert one.

≥You haven’t inserted the disc correctly; insert it correctly.

≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

≥Disc is dirty. Wipe it clean.

≥You inserted a DVD-R that has not been finalized.

≥Incorrect operation performed. Read the instructions and try again.

≥The remote control and main unit are using different codes. Change the code on the remote 

control. 

∑∑”, “F∑∑”

∑∑ stands for a number.

≥Trouble may have occurred. The number following “H” or “F” depends on the status of the 

unit. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect both 
AC power supply cords, and then reconnect them.

≥If the service numbers fail to clear, note the service number and contact a qualified service 

person.

≥The operation is prohibited by the unit or disc.

≥You are trying to display incompatible contents.

≥You can only play DVD-Video if their region number is “1” or includes the same region 

number as the unit or if the DVD-Video is marked “ALL”.

≥Select “On” in “On-Screen Messages” in “Display” tab.

≥Select “ON” in “OSD” of “OPTION” setting in the VHS MENU.

≥Select the preferred language in “Menus” in “Disc” tab.

≥Select the preferred language in “LANGUAGE” in the VHS MENU.

7388en.book  52 ページ  ２００３年１２月２２日　月曜日　午後９時３９分