Sony LBT-ZUX9 매뉴얼

Press CD-

SYNC/REC 1.

“USB” lights up and “REC”
flashes in the display. The display 
cycles through “CD-USB REC1”, 
“Push ENTER” and “xxxxxxByte Free 
Space” (remaining space on the USB 
device)*.

* The display will only show an integer. 

For example, if the memory free space is 
1.8 Gigabyte (Gb), it will only show as 
1 Gb.

Recording starts.
When the recording is completed, 
the disc and the USB device stop 
automatically.

Recording starts.
When the recording is completed, 
the disc continues to play back. 
To stop recording, press x.

Check that the REC/ERASE 
indicator on the unit is light off.

Press 

"/1

 to turn off the system.

Remove the USB device.

You can erase an MP3 audio track or an 
MP3 audio track folder from the USB 
device.

Connect a recordable USB device  
to the 

 (USB) port on the unit.

Press 

 (or USB on the 

remote).

Press 

 

+/–

 

 repeatedly to select 

the folder you want. To erase the 
folder, proceed to step 4.

To erase an MP3 audio track, press 
. or > repeatedly to select the 
MP3 audio track you want, then 
proceed to step 4.

Press ERASE.

“Track Erase ?” or “Folder Erase ?”, 
and “Push ENTER” appear 
alternatively in the display.
To cancel the erase operation, press x.

Press ENTER.

The selected MP3 audio track or MP3 
audio track folder is erased.
The folder would only be deleted if the 
folder only contained MP3 audio tracks 
and there is no sub folder.

• The program list is cleared when you perform 

the erase operation.

• You cannot erase MP3 audio tracks and 

folders in Shuffle Play mode or Program Play 
mode.

When recording to a USB device for the 
first time, a “MUSIC” folder is created 
directly below the “ROOT” folder. 
Folders and MP3 audio tracks are 
generated within this “MUSIC” folder as 
follows according to the recording 
method.

MP3 disc

Same as the recording source

2)

AUDIO 
CD

FLDRXXX

3)

TRACKXXX

4)

l