Samsung HW-H600/ZA 사용자 설명서

FUNCTIONS

 Samsung may offer upgrades for the 
SoundStand's system firmware in the future.

  If an upgrade is offered, you can upgrade the 
firmware by connecting a USB device with the 
firmware upgrade stored on it to the USB port on 
your SoundStand.

  Note that if there are multiple upgrade files, you 
must load them onto the USB device singly and use 
them to upgrade the firmware one at a time.

 Please visit samsung.com or contact the Samsung 
call center to receive more information about 
downloading upgrades files.

 

 

●  Insert a USB device containing the 

firmware upgrade into the USB port on 
the main unit.

●   Do not disconnect the power or remove 

the USB device while upgrades are being 
applied. The main unit will turn off 
automatically after completing the 
firmware upgrade.
When software is upgraded, all settings 
are reset to their factory default settings.
We recommend you write down your 
settings so that you can easily reset them 
after the upgrade.

●   Once the software upgrade is completed, 

turn off the product and then press and 
hold the (►) button for a while to reset 
the product.

●   If the firmware fails to upgrade, we 

recommend formatting the USB device in 
FAT16 and trying again.

●   Do not format the USB device in the NTFS 

format. The SoundStand does not support 
the NTFS file system.

●   Depending on the manufacturer, some 

USB devices may not be supported.