Sony LBTGPX55 사용자 설명서

model name [LBT-GPX77/GPX55/MHC-GPX88/GPX77/GPX55/GPX33]

[4-449-052-13(1)] GB

filename[D:\MASNI JOB 
FOLDER\SO130010\GB\4449052131\4449052131\06BAS.fm]

masterpage:Right

The BLUETOOTH indicator lights up or 
flashes in blue to show the Bluetooth 
status.

Pairing is an operation where Bluetooth 
devices register with each other 
beforehand. Once a pairing operation is 
performed, it does not need to be 
performed again. If your device is an 
NFC-compatible smartphone, the manual 
pairing procedure is not necessary.

Place the Bluetooth device 
within 1 meter (3 feet) from the 
system.

Press BLUETOOTH on the unit 
to select Bluetooth function.

“BLUETOOTH” appears in the 
display panel.

If the system is connected to a Bluetooth 
device, press BLUETOOTH to disconnect 
the Bluetooth device.

“PAIRING” flashes in the display 
panel.

Perform the pairing procedure 
on the Bluetooth device.

For details, refer to the operating 
instructions of your Bluetooth device.

Select the model number of the 
unit on the display of the 
Bluetooth device.

For example, select “SONY 
MHC-GPX88” (or LBT-GPX77/
GPX55/MHC-GPX77/GPX55/
GPX33). 
If passkey is required on the Bluetooth 
device, enter “0000”.

Perform the Bluetooth 
connection on the Bluetooth 
device.

When pairing is completed and the 
Bluetooth connection is established, 
Bluetooth device name appears in the 
display panel.
Depending on the Bluetooth device, 
connection may start automatically 
after pairing is completed.
You can check the Bluetooth device 
address by pressing DISPLAY 
repeatedly.

• You can pair up to 9 Bluetooth devices. If the 

10th Bluetooth device is paired, the least 
recently connected device will be replaced by 
the new one.

• “Passkey” may be called “Passcode”, “PIN 

code”, “PIN number” or “Password”, etc., 
depending on the device.

• The pairing standby status of the system is 

canceled after about 5 minutes. If pairing is 
not successful, repeat from step 1.

• While connected to a Bluetooth device, this 

system cannot be detected and connection 
cannot be established from another Bluetooth 
device which is never paired before.

• If you want to pair with another Bluetooth 

device, repeat steps 1 to 6.

Bluetooth standby

Flashes slowly

Bluetooth pairing

Flashes quickly

Bluetooth connecting Flashes

Bluetooth connection 
is established

Lights up

Pairing this system with a 
Bluetooth device