Netgear RP114 사용자 설명서

Reference Guide for the Model RP114 Web Safe Router

2-6

Setting Up the Hardware

After connecting the power adapter to the router and a power source, the router powers on 
automatically. Complete the following steps to verify that power is correctly applied to the router:

1.

When power is first applied, verify that the PWR LED is on.

2.

Verify that the TEST LED begins to blink within a few seconds.

3.

After approximately 30 seconds, verify that:

a.

The TEST LED is not lit.

b.

The LAN LNK/ACT LEDs are lit for any local ports that are connected.

c.

The WAN LNK LED is lit.

If a LNK or LNK/ACT LED is lit, a link has been established to the connected device.

4.

If a LOCAL port is connected to a 100 Mbps device, verify that the 100 LED is lit.

You are now ready to begin configuration of your network, as described in the following chapter.