Fujitsu RX100 S2 사용자 설명서
206
Chapter 8 Hardware Configuration/Utilities
8.2.9 Power On/Off Submenu
Appears when [Power On/Off] is selected from the [Advanced] menu.
Configures power On/Off settings.
table: Items on the Power On/Off Submenu
Item
Setting
Description
Remote
• Disabled
• Enabled (at the time of
• Enabled (at the time of
purchase)
Sets whether or not the power can be turned on
when the modem (connected to the serial port)
receives a ring signal.
when the modem (connected to the serial port)
receives a ring signal.
Resume On Time
• Off (at the time of
purchase)
• On
Sets whether or not to resume from suspend mode
at the specified time.
at the specified time.
Resume Time
-
Specifies the time to resume in the 24-hour
"hours:minutes:seconds" format.
"hours:minutes:seconds" format.
LAN
• Disabled
• Enabled (at the time of
• Enabled (at the time of
purchase)
Sets whether or not to enable the power to be turned
on via LAN.
on via LAN.
Power Failure Recovery
• Always OFF
• Previous State (at the
• Previous State (at the
time of purchase)
• Always ON
Sets the server power status after system down due
to power failure or after power recovery by the
UPS.
to power failure or after power recovery by the
UPS.
Note:
If the server power is turned off
If the server power is turned off
automatically by the OS for Windows Serer
2003 or others and if you use the scheduled
operation using the UPS, set this item to
[Always ON].
Item Specific Help
PhoenixBIOS Setup Utility
Advanced
Power On Source
Remote: [Enabled]
Resume On Time: [Off]
Resume Time: [00:00:00]
LAN: [Enabled]
Remote: [Enabled]
Resume On Time: [Off]
Resume Time: [00:00:00]
LAN: [Enabled]
Power Failure Recovery:[Previous State]
Power On/Off
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values
-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit