Samsung GH68-11254A 전단

Guide No.: GH68-11254A
0

9/2006. Rev. 1.2

1 

 Set your Bluetooth phone to discover the  

    headset by following your phone's guide. 

    Typically, the steps involve going to the Settings,
    Connection, or Bluetooth menu on your 
    phone and then selecting the option to discover
    Bluetooth devices.

    Your phone will find the Samsung WEP200 
    headset. 

2 

 Select Samsung WEP200. 

3 

 When the phone asks if you want to pair with it,

    confirm by selecting Yes or OK. 

4 

 Enter the headset passkey or PIN, 0000. 

Thank you for purchasing the Samsung Bluetooth 
Mono Headset WEP200, we hope you will be 
delighted with its operation.
Take a moment before you get started to 
familiarize yourself with your new headset.

Make sure you have the following items with your 
headset: 

Make sure you have the following items with your 
headset: 

Charging case, Travel adapter, Manual, 
2 headset hooks

Charging case, Travel adapter, Manual, 
2 headset hooks

Charging case, Manual, 2 headset hooks
For Set 2, use your phone charger as a 
power source for recharging.

Charging case, Manual, 2 headset hooks
For Set 2, use your phone charger as a 
power source for recharging.

Charge the headset's battery fully before using 
the headset for the first time.

1 

 Put the headset in the supplied charging case 

    and close the cover.

2 

 Plug the travel adapter into the case's 

    charging socket.

3  Plug the travel adapter into the electrical 
    outlet. 

4

  Remove the travel adapter from the case.

• For Set 1, use the travel adapter provided.
• Charge the headset until the red light on the  
   headset turns to blue.
• The headset will be fully charged in 
   approximately 2 hours.

Before you can use your headset, you must pair it 
with your phone.

Your phone and headset are now paired and 
ready to make and receive calls. To confirm 
they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wearing the headset on the reverse 
    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 
and headset, you do not need to repeat these 
initial setup steps each time you use the 
headset.

1 

 Ensure that the headset is off (see Turn

    headset on/off on the reverse side of this guide).

2 

 Press and hold the Multi-Function button until 

    the indicator light turns on in blue 
    (approximately 8 seconds).

Multi-Function button

Hook

Volume control

buttons

Indicator light

Microphone

Charging contact

NOTE:
The headset cannot be used while charging.

NOTE:
Your headset supports the headset and/or hands-free 
profile(s).

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use

Headquarters:
1301 East Lookout Drive Suite 150 
Richardson, TX 75082  

Internet Address: 
http://www.samsungmobileusa.com/
accessories

Customer Care Center: 
1-888-987-4357