Uniden r035 사용자 설명서

1

For more details, see the Important Information section.

Unpack all handsets, batteries, and 

1. 

battery covers. If you need to remove a 

battery cover, press in on the notch and 

slide the cover down.

Line up the battery connector with the jack inside the handset and 

2. 

push the connector in until it clicks into place. Tug gently on the 

wires to make sure the battery pack is securely connected. 

Replace the cover and slide it up into place.

3. 

Connect the base AC adapter to the 

4. 

 jack on the base. Run 

the cord through the indent and out the back.

If you have accessory handsets, connect each charger’s AC adapter 

5. 

to the 

 and run the cord though the indent. (See page 5 

for the repeater/chargers.) 

Plug the other end of each adapter into a standard 240V AC power 

6. 

outlet.

Place one handset in the base and the other(s) in the charger(s) 

7. 

with the display(s) facing forward. The display on the handset 

should light up; if it doesn’t, reseat the handset or try plugging the 

AC adapter into a different outlet. 

#

XDECT R035 OM.indd   1

22/9/11   1:50:58 PM