Samsung GH68-12483A 전단

Guide No.: GH68-12483A

04/2007.Rev.1.1

Thank you for purchasing the Samsung Bluetooth 

Mono Headset WEP420. We hope you will be 

delighted with its operation. 

Take a moment before you get started to  

familiarize yourself with your new headset. 

Make sure you have the following items with your 

headset: 

Make sure you have the following items with your 

headset: 

Charging Cradle, Travel Adapter, User’s Guide

Charging Cradle, Travel Adapter, User’s Guide

Charge the headset's battery fully before using 

the headset for the first time. 

 

1 

 Insert your headset into the slot of the 

charging cradle. 

 

 

 

 

 

2 

 Plug the travel adapter into the jack on the 

charging cradle. 

3  

Plug the travel adapter into the electrical  

    outlet.

  

 

• Charge the headset until the red light on the   

   headset turns to blue. 

• The headset will be fully charged in  

   approximately 2 hours. 

 

Before you can use your headset, you must pair it 

with your phone. 

Your phone and headset are now paired and 

ready to make and receive calls. To confirm 

they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wear the headset on the reverse 

    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 

and headset, you do not need to repeat these 

initial setup steps each time you use the 

headset.

1 

 Ensure that the headset is off (see Turn 

    headset on/off on the reverse side of this guide). 

 

2 

 Press and hold the Multi-Function button until  

    the indicator light turns on in blue  

    (approximately 8 seconds). 

Multi-Function

button

Headset cover

Volume control

buttons

Indicator light

Earpiece

Microphone

4

  Remove the travel adapter from the charging  

cradle. 

• The headset cannot be used while charging. 

• Use only a Samsung-approved charger or adapter. 

Start here 

Charge your headset 
Put your headset in pairing mode 
Turn on Bluetooth on your phone and 
pair with headset 
Test and use 

1301 East Lookout Drive Suite 150 

Richardson, TX 75082  

http://www.samsungmobileusa.com/

accessories

1-888-987-4357

 

 

 

Earhook

The items supplied with your headset may vary, depending 

on your country or service provider. 

1 

 Set your Bluetooth phone to discover the   

    headset by following your phone's guide.  

 

    Typically, the steps involve going to the Settings, 

    Connection, or Bluetooth menu on your  

    phone and then selecting the option to discover 

    Bluetooth devices. 

 

    Your phone will find the Samsung WEP420      

    headset and ask if you want to pair with it.  

    Confirm this by pressing the Yes or OK key.  

 

2 

 Enter a passkey or PIN, 0000 (4 zeros), then  

    press the Yes or OK key.