Samsung GH68-15049A 전단

Guide No.: GH68-15049A

07/2007. Rev. 1.1

Thank you for purchasing the Samsung Bluetooth 

Mono Headset WEP500. We hope you will be 

delighted with its operation.

Take a moment before you get started to 

familiarize yourself with your new headset.

Make sure you have the following items with your 

headset: 

Make sure you have the following items with your 

headset: 

Charge the headset's battery fully before using 

the headset for the first time.

1 

 Put the headset in the supplied headset 

    cradle and close the cover.

2 

 Plug the adapter into the headset cradle’s 

    socket.

3

  Plug the adapter into the electrical outlet. 

4

  Remove the adapter from the headset cradle.

• Charge the headset until the red light on the  

   headset turns to blue.

• The headset will be fully charged in 

   approximately 2 hours.

Before you can use your headset, you must pair it 

with your phone.

•   If you turn on the headset for the first time, it 

    proceeds into pairing mode immediately. 

    

•   If you have paired the headset with other Bluetooth  

    devices, make sure that the headset is off (see Turn 

    headset on/off on the reverse side of this guide). 
    Then press and hold the Multi-Function button until 

    the indicator light turns solid blue after blinking.

Multi-Function 

button

Earpiece

Secondary

microphone

Volume Up

button

NOTE:

The headset is not able to operate while charging. 

Try to reconnect after charging is completed.

NOTE:

Your headset supports the Headset and/or Hands-Free 

Profile(s).

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use

1301 East Lookout Drive Suite 150 

Richardson, TX 75082  

http://www.samsungmobileusa.com/

accessories

1-888-987-4357

Volume Down

 button

Primary

 microphone

Indicator light
Charging contact

Headset cradle, Adapter, User’s Guide, 

3 Earpiece Covers (Large, Medium, Small)

Headset cradle, Adapter, User’s Guide, 

3 Earpiece Covers (Large, Medium, Small)

1 

 Set your Bluetooth phone to discover the  

    headset by following your phone's user guide. 
    Typically, the steps involve going to the Settings,

    Connection, or Bluetooth menu on your 

    phone and then selecting the option to discover

    Bluetooth devices.
    Your phone will find the Samsung WEP500 

    headset. 

2 

 Select Samsung WEP500. 

3 

 When the phone asks if you want to pair with it,

    confirm by selecting Yes or OK. 

4 

 Enter the headset passkey or PIN, 0000. 

Your phone and headset are now paired and 

ready to make and receive calls. To confirm 

they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wear the headset on the reverse 

    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 

and headset, you do not need to repeat these 

initial setup steps each time you use the 

headset.