JVC GET0200-001A 사용자 설명서
31
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
button, the adjustable
items change as follows:
For KD-G801:
For KD-G701:
Indication
To do:
Range
FAD
*
1
Adjust the front
R06 (Rear only)
and rear speaker |
balance.
balance.
F06 (Front only)
BAL
Adjust the left
L06 (Left only)
and right speaker |
balance.
balance.
R06 (Right only)
LOUD
Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
high frequencies
to produce a
well-balanced
sound at low
volume level.
WOOFER
*
2
Adjust the
00 (min.)
(only for
subwoofer
|
KD-G801)
output level.
08 (max.)
VOL
*
3
Adjust the
00 (min.)
volume.
|
30 or 50 (max.)
30 or 50 (max.)
*
4
To increase the level or
turn on the loudness
turn on the loudness
To decrease the level or
turn off the loudness
turn off the loudness
LOUD ON
|
LOUD OFF
|
LOUD OFF
*
1
If you are using a two-speaker system, set the fader
level to “00.”
level to “00.”
*
2
This takes effect only when a subwoofer is
connected.
connected.
*
3
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
control. So you do not have to select “VOL” to
adjust the volume level.
*
4
Depending on the amplifier gain control setting.
(See page 38 for details.)
(See page 38 for details.)
2
Adjust the setting.
3
Repeat steps
1
and
2
to adjust the
other items.
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
WOOFER
(subwoofer)
Ex. 1: When you adjust “FAD” (fader)
Ex. 2: When you turn on the loudness
Indication pattern changes as
you adjust the fader or balance.
you adjust the fader or balance.
LOUD indicator
EN31-33_G801_G701[E_EX]f.p65
1/7/04, 4:23 PM
31