JVC GET0568-003A 사용자 설명서

ENGLISH

16

•  This unit can recognize a total of 512 files, 

255 folders, and 8 hierarchical levels.

•  This unit can play back files recorded in VBR (variable 

bit rate).

  Files recorded in VBR have a discrepancy in the 

elapsed time display, and do not show the actual 
elapsed time. In particular, this difference becomes 
noticeable after performing the search function.

•  This unit cannot play back the following files:
  – MP3 files encoded in MP3i and MP3 PRO format.
  – MP3 files encoded in an inappropriate format.
  – MP3 files encoded with Layer 1/2.
  – WMA files encoded in lossless, professional, and 

voice format.

  – WMA files which are not based upon Windows 

Media ®  Audio.

  – WMA files copy-protected with DRM.
  – Files which have data such as AIFF, ATRAC3, etc.
•  The search function works but search speed is not 

constant.

•  If the ejected disc is not removed within 15 seconds, 

it is automatically inserted into the loading slot again 
to protect it from dust. Playback starts automatically.

•  If you try to assign titles to more than 30 station 

frequencies, “NAME FULL” appears. Delete unwanted 
titles before assignment.

•  If you change the “AMP GAIN” setting from 

“HIGH POWER” to “LOW POWER” while the 
volume level is set higher than “VOLUME 30,” the 
unit automatically changes the volume level to 
“VOLUME 30.”

  – The files on the CD-R/CD-RW are written using the 

“Packet Write” method.

  – There are improper recording conditions (missing 

data, etc.) or media conditions (stained, scratched, 
warped, etc.).

•  CD-RWs may require a longer readout time since the 

reflectance of CD-RWs is lower than that of regular 
CDs.

•  Do not use the following CD-Rs or CD-RWs:
  – Discs with stickers, labels, or a protective seal stuck 

to the surface.

  – Discs on which labels can be directly printed by an 

ink jet printer.

  Using these discs under high temperature or high 

humidity may cause malfunctions or damage to the 
unit.

•  This unit can play back MP3/WMA files with the 

extension code <.mp3> or <.wma> (regardless of 
the letter case—upper/lower).

•  This unit can show the names of albums, artists 

(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 
2.4) for MP3 files and for WMA files.

•  This unit can display only one-byte characters. No 

other characters can be correctly displayed.

•  This unit can play back MP3/WMA files meeting the 

conditions below:

  – Bit rate: 8 kbps — 320 kbps
  – Sampling frequency:
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
  – Disc format: ISO 9660 Level 1/Level 2, Romeo, 

Joliet, Windows long file name

•  The maximum number of characters for file/folder 

names vary depending on the disc format used 
(includes 4 extension characters—<.mp3> or 
<.wma>).

  – ISO 9660 Level 1: up to 12 characters
  – ISO 9660 Level 2: up to 31 characters
  – Romeo: up to 128 characters
  – Joliet: up to 64 characters
  – Windows long file name: up to 128 characters

EN16-21_KD-R306_001A_f.indd   16

EN16-21_KD-R306_001A_f.indd   16

20/8/08   3:32:14 PM

20/8/08   3:32:14 PM