JVC GET0568-003A 사용자 설명서
ENGLISH
8
3
Selecting preset station
The following features are available only for FM
Radio Data System stations.
Radio Data System stations.
Searching for FM Radio Data
System programme — PTY Search
You can tune in to a station broadcasting your favorite
programme by searching for a PTY code.
programme by searching for a PTY code.
1
The last selected PTY code
appears.
appears.
2
Select one of your favorite programme types
or a PTY code.
or
[Turn]
=
[Press]
3
Start searching for your favorite programme.
or
If a station is broadcasting a programme of the
same PTY code as you have selected, that station is
tuned in.
same PTY code as you have selected, that station is
tuned in.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 14).
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 14).
To activate TA Standby Reception
The TP (Traffic Programme)
indicator either lights up or flashes.
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby Reception is
activated.
• If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the Radio Data System
signals required for TA Standby Reception.)
to an FM station without the Radio Data System
signals required for TA Standby Reception.)
To activate the reception, tune in to another station
providing these signals. The TP indicator will stop
flashing and remain lit.
flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
EN02-09_KD-R303_003A_2.indd 8
EN02-09_KD-R303_003A_2.indd 8
20/8/08 11:29:57 AM
20/8/08 11:29:57 AM