JVC KD-A305/KD-R300 사용자 설명서

ENGLISH

EXTERNAL DEVICES

Registering using “OPEN”

Preparation: Operate the device to turn on its
Bluetooth function.

Select “BT-PHONE” or “BT-AUDIO.”

Select “NEW DEVICE.”

Select “OPEN.”

Enter a PIN (Personal Identification Number)

code to the unit.
• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]

* Some devices have their own PIN code. Enter the

specified PIN code to the unit.

Move to the next (or previous) number

position.

Select a number.

Repeat steps

and

until you finish

entering a PIN code.

Confirm the entry.

“OPEN..” flashes on the display.

Continued on the next page

Use the Bluetooth device to search and

connect.

On the device to be connected, enter the same
PIN code you have just entered for this unit.
“CONNECTED” appears on the display.

Now connection is established and you can use the
device through the unit.

The device remains registered even after you
disconnect the device. Use “CONNECT“ (or activate
“AUTO CNNCT”) to connect the same device from
next time on. (See the following and page 22.)

Connecting a device

Perform steps

1 and 2 on left column, then...

• Select “SEARCH” to search for available

devices.

The unit searches and displays the list of the

available devices. If no available device is
detected, “UNFOUND” appears.

• Select “SPECIAL” to connect a special

device.

The unit displays the list of the preset devices.

Select a device you want to connect.

• For available devices...

Enter the specific PIN code of the device to the

unit.

Refer to the instructions supplied with the device

to check the PIN code.

Use the Bluetooth device to connect.

Now connection is established and you can use

the device through the unit.

• For special device...

Use “OPEN” or “SEARCH” to connect.

EN10-15_KD-A305_R300[J]_6.indd 11

8/8/08 10:15:01 AM