Jensen CD1213 사용자 설명서

CD1213

5

Press the BAND button (5) during radio play to 

switch between three FM bands and one AM 

band. “F1”, “F2”, “F3” or “AM” will appear in the 

display to indicate the band currently selected.

Automatic Tuning
Press the >>| button (14) to tune upward in 

frequency and the |<< button (13) to tune 

downward in frequency. The unit will 

automatically stop at the next strong station. If 

the Local mode is active, the radio will seek the 

next strong local station when either button is 

pressed.
Manual Tuning
Press the >>| (14) or |<< (13) button for more 

than two seconds to select manual tuning 

mode. “MANUAL” will appear in the display. 

Press the Up or Down Tuning buttons to move 

radio frequency up or down two digits at a time. 

Press and hold the Up or Down Tuning buttons 

to quickly advance to a certain frequency. 

Release when the desired frequency is 

reached. If tuning is not adjusted within five 

seconds of entering manual tuning mode, the 

radio will revert to automatic tuning and “AUTO” 

will appear in the display.

Press the SCAN button (15) to scan upwards 

through all the strong channels in the current 

band. The unit will pause and play each station 

for five seconds, and the station frequency will 

flash in the display during this time. Press 
SCAN

 again to stop scanning and listen to the 

current station. 

4 x 40W