Sanyo FXD-780RDS 사용자 설명서
GB–18
ERROR SIGNS
If a problem should occur while operating the CD player, one of the following error signs may be displayed.
Refer to the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your nearest dealer.
Refer to the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your nearest dealer.
Message
Cause
Remedy
Dirty disc.
Clean the disc.
Scratched disc.
Replace the disc.
Up-side-down.
Check the disc.
Focus error.
Try ejecting and re-inserting
under normal temperature
conditions.
Data and focus error.
Under normal temperature
conditions, eject and insert
clean, undamaged disc
properly.
Mechanical problem.
Eject and re-insert.
CD ERROR
MECK ERR.
ERROR SIGNS (CD changer)
If a problem should occur while operating the CD changer, one of the following error signs may be dis-
played. Refer to the table below to identify the problem, then take the suggested corrective action. If the
error persists or “MECA ERR” and “09 ERROR” appears, contact your nearest dealer.
played. Refer to the table below to identify the problem, then take the suggested corrective action. If the
error persists or “MECA ERR” and “09 ERROR” appears, contact your nearest dealer.
No magazine.
No disc.
No disc.
Up-side-down.
Communication error
Excessive temperature
conditions at the CD
changer.
conditions at the CD
changer.
NO MAGA
NO DISC
CD ERROR
COMM ERR
TEMP ERR
Load the magazine in
the CD changer.
Check the disc.
the CD changer.
Check the disc.
Check the disc.
Check the connection of
the CD changer.
The error sign will go off
and play will resume
when the temperature at
the CD changer returns
to a normal range.
the CD changer.
The error sign will go off
and play will resume
when the temperature at
the CD changer returns
to a normal range.
Message
Cause
Remedy
780RDS/CDC_body
8/20/02, 5:58 PM
18