Sanyo FXD-780RDS 사용자 설명서

다운로드
페이지 26
GB–5
GENERAL OPERATION
1
2
3
4
5
6
AUDIO
MUTE
RPT
SHF
REL
BAS-X
ATP
CDC
POWER
- - DISC - +
TUN
TRK
SCAN
AF
AF
FM /AM  CD RECEIVER    FXD-780RDS   50W x 4
VOL
TURNING THE POWER ON ......................................1
Install the front panel and press the PWR MUTE button 1 when ACC is on.
TURNING THE POWER OFF ............................................................. 1
Press the PWR MUTE button for more than 2 seconds. Display will revert to clock indication.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
MUTING THE SOUND .......................................................................... 1
Press the PWR MUTE button 1 while the receiver is on. While muting the sound, the MUTE indicator
 on the display is blinking. To restore the previous volume level, press PWR MUTE button again.
SETTING THE CLOCK ..................................3, 2, 6, 8
The clock uses a 24-hour display system.
1.
Press the AUDIO button 3 for more than 2 seconds.
2.
Press the following buttons to set the clock.
VOL dial 2
: Adjust the hour and minutes.
TUN/TRK 
 8 : To activate Hour blink.
TUN/TRK 
 8 : To activate Minute blink.
BAND ATP 6
: Adjust the minutes to zero.
(Example)
12:29
 → 12:00
12:30
 → 13:00
3.
Press the AUDIO button 3 to activate the clock.
CT(Clock Time) select ....................................................................... 5
Press the TA AF button 5 while the clock indicator flashes  in order to select or deselect the CT if so
desired. (The CT function is initially set to ON when shipped)
The CT function of the RDS enables the built-in clock in the unit to automatically synchronize with the CT
data. When you select “CT ON”, the clock is automatically adjusted to the local time transmitted by an RDS
station.
Notes
• The CT function may not work even though an RDS station.
• The time set by the CT function may not be accurate.
1
3
4
2
5
6
7
8
 780RDS/CDC_body
8/20/02, 5:58 PM
5