VDO Dayton CD 2327 G 사용자 설명서

20

If you do not wish to continue listening to a par-

ticular Traffic Announcement broadcast, you can 

interrupt it without switching off the TA mode.

Short-press the 

AF

TA

 button once, the hea-

dunit will return to the previous operating 

mode.

EON information allows the updating of RDS 

information for programme services other than 

the currently tuned station. By default, this EON 

function is enabled. To toggle the settings:

Navigate the SAM to select ‘TA EON’.

Turn the knob clockwise / anti-clockwise to 

toggle the modes (Off, Local or Distant).

Note: The reception of distant stations, which 

may be weaker due to its distance, may be bad 

and the audio output may be distorted as a re-

sult.

This function is available with FM only. It enables 

you to select stations by programme type. There 

is a coding of up to 28 pre-defined programme 

types – e.g. (in Europe): PTY1 News, PTY6 

Drama, PTY11 Rock music.

Long-press 

BAND

PTY

 button to activate the PTY 

function.

Short-press either   button 

or   button to 

select the desired programme type.

Short-press either 

 button 

or 

 button 

to search for PTY stations.

To change the operation mode of the PTY, you 

need to change the setting in the SAM.

Navigate the SAM to select ‘PTY’.

Turn the knob clockwise / anti-clockwise to 

toggle the PTY setting.

Note: Setting ‘PTY’ menu item to ‘NEWS INT’ 

will allow PTY-NEWS to interrupt (in a similar 

way as TA interruption) when there is an incom-

ing NEWS.

To change the way this headunit reacts to the 

environmental conditions affecting the quality of 

the radio stations, you can change the setting in 

the SAM.

Navigate the SAM to select ‘REG-RDS’.

Turn the knob clockwise / anti-clockwise to 

toggle the REG-RDS setting.

1.

1.

2.

1.

2.

3.

1.

2.

1.

2.

If not already on, short-press the 

PWR

MUTE

 button 

to turn on the headunit.
Press the 

REL

 button to flip down the front.

Insert the CD (label facing up) into the CD 

slot.

Close the front.

The display should show “CD READ” while 

still reading the disc.

When a disc is loaded, it will start playing auto-

matically.
Note: If a CD does not automatically load, DO 

NOT FORCE it into the slot. This could damage 

the CD and the headunit.

Press the REL button to flip down the front.

Press the EJECT button to eject the disc.

Remove the disc.

Close the front.

Depending on the type of CD-R / CD-RW CD, 

surface condition of the disc, as well as the per-

formance and condition of the CD writer, certain 

CD-R / CD-RW CD may not operate normally on 

this headunit.

Due to the use of copy protection schemes of 

some audio CDs, which are non-conforming to 

international audio CDs standards (Red Book), 

these types of copy-protected disc(s) may not 

play on this headunit.

In the case of multi-session disc with such 

schemes, you may try to disable the multi-ses-

sion ability by changing the SAM setting to allow 

reading of at least the first session.

Navigate the SAM to select ‘MULTI-S’.

Turn the knob clockwise / anti-clockwise to 

toggle the multi-session support.

Try playing the “copy-protected” disc again.

Note: Remember to enable the multi-session 

support again in the SAM after playing this disc!

1.

2.

3.

4.

5.

1.

2.

3.

4.

1.

2.