VDO Dayton CD 2327 G 사용자 설명서
24
Continue programming your SWRC’s buttons
to the pre-defined as much as possible with
the same steps.
For those buttons that you do not need,
please disabled them by selecting “-DIS-
ABLE-” and press-and-hold the unwanted
buttons for more than 2 seconds.
Important Note: In the case that you did not
disable the unwanted SWRC buttons, due to the
complexity of the programming to cater to most
types of SWRC, the headunit may recognise an
unwanted key-press on your SWRC as one of
the valid input.
9. Continue to select “-DISABLE-” and repeat
9. Continue to select “-DISABLE-” and repeat
the process to disable all unwanted buttons.
10. To exit the programming mode and SAVE all
settings, short-press the
SAM
AST
button.
11. To exit the programming mode and DISCARD
all settings, short-press the
PWR
MUTE
button.
These pre-defined functions emulate the buttons
on the front panel:
Volume-
Volume+
Source
Right
Left
Up
Down
Mute
-Disable-
Please refer to the section on "FRONT PANEL
AND REMOTE CONTROL" for buttons' function-
alities.
.
8.