Sony 70AP 사용자 설명서

55

DSR Series

1

STANDBY

TENSION

STOP

0

REW

F.FWD

REC

PLAY

ON

RELEASE

(EJECT)

The statuses at OPEN PLAY in the DSR-DR1000 are shown below.

FILE OPEN MODE

0x00

OPEN PLAY

FILE OPEN STATUS

0x01

NOT OPENED

0x02

IN PROGRESS

0x08

OPEN COMPLETE

0x10

FAIL, FILE NOT FOUND

0x15

FAIL, ILLEGAL VALUE

0x1A

FAIL, DRIVE NOT READY

0x1F

FAIL, OTHER REASONS

Status of the OPEN PLAY command of the DSR-DR1000 is indicated by the EJECT bit (bit-4) of the
status data of the VTR command. When the EJECT bit is changed from 1 to 0, it indicates that the OPEN
PLAY operation is completed.

m
. If the Stop button on the front panel is pressed, or the DSR-DR1000 has entered either the Disk menu

or Network menu or Repeat Function while the Playlist is being opened, the DSR-DR1000 returns to
the state that it plays back the default.dlt. (The screen returns to the previous screen before OPEN.)

. The OPEN PLAY command can be used also when it is not in the CLOSE state (i.e., when the EJECT

bit is ON). However, you cannot confirm if the OPEN PLAY has terminated or not from the EJECT bit
information. (The EJECT bit does not change.)

(2) CLOSE
In the DSR-DR1000, the CLOSE command is used to set the EJECT bit of the Status data of the VTR
command, and to move the mode to the Stop mode if the DSR-DR1000 is not in the stop mode before it
receives the CLOSE command.

Command format

DC

1

0x01

Data Count

CMD1

1

0x19

Command1

CMD2

1

0x01

Command2

DATA1

1

0x00

FILE HANDLE

Conditions of operation
FILE HANDLE

0x00 only

Status of the CLOSE command of the DSR-DR1000 is indicated by the EJECT bit (bit-4) of the status
data of the VTR command. When the EJECT bit is 1, it indicates that the CLOSE operation is completed.

1

STANDBY

TENSION

STOP

1

REW

F.FWD

REC

PLAY

ON

RELEASE

(EJECT)