ZyXEL Communications P-660H-TX 사용자 설명서

                                         

(3) WWW/Telnet service is enabled but your host IP is not the secured host 
entered in Web Configurator, Advanced setup, Advanced -> Remote 
MGNT: 

 

(4)A filter set which blocks WWW/Telnet from WAN is applied to WAN node. 
You can check by command: 
wan node index [index #] 
wan node display   

4. Why can't I upload the firmware and configuration file using FTP over 
WAN?   

(1) When the firewall is turned on, all connections from WAN to LAN are 
blocked by the default ACL rule. To enable FTP from WAN, you must turn 
the firewall off or create a firewall rule to allow FTP connection from WAN. 
The WAN-to-LAN ACL summary will look like as shown below.   

            Source IP= FTP host   
      Destination IP= P-660H-Tx v2's WAN IP  
      Service= FTP TCP/21, TCP/20  
      Action=Forward  

                                     

24 

All contents copyright © 2006 ZyXEL Communications Corporation.