Blaupunkt RCM 104 A 사용자 설명서
27
Barcelona RCM 104A
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
4
M•L
To change between medium wave
(MW) and long wave (LW) frequencies.
To change between medium wave
(MW) and long wave (LW) frequencies.
5
-dB - for instantly changing the volume.
Press the -dB button to instantly mute
the audio source. The display will then
show MUTE. Return to normal volume
by pressing either the -dB or the VOL+
button.
When pressing VOL-, the normal play-
back volume is identical to the -dB (mu-
ted) volume.
To program the mute volume, proceed
as follows:
•
Press the -dB button to instantly mute
the audio source. The display will then
show MUTE. Return to normal volume
by pressing either the -dB or the VOL+
button.
When pressing VOL-, the normal play-
back volume is identical to the -dB (mu-
ted) volume.
To program the mute volume, proceed
as follows:
•
Adjust the desired volume.
•
Press -dB for approximately 2 se-
conds (beep tone is released).
conds (beep tone is released).
This volume will then be stored as the
mute volume.
Extra function:
Press this button to store the values set
in the DSC menu.
mute volume.
Extra function:
Press this button to store the values set
in the DSC menu.
Quick instructions
1
Switching on:
Press the ON button (the KeyCard has
to be inserted), the set plays with the
pre-adjusted volume.
Switching off:
Press ON for approximately 1 second.
If the set was turned on by pressing
ON, the KeyCard can be used for swit-
ching the system on and off. Please
read the information of chapter “Key-
Card”.
The set may also be turned off via the
vehicle’s ignition (provided that it was
connected correspondingly). After the
ignition was switched off, a double
beep tone reminds you that you should
remove the KeyCard before leaving
your vehicle.
Press the ON button (the KeyCard has
to be inserted), the set plays with the
pre-adjusted volume.
Switching off:
Press ON for approximately 1 second.
If the set was turned on by pressing
ON, the KeyCard can be used for swit-
ching the system on and off. Please
read the information of chapter “Key-
Card”.
The set may also be turned off via the
vehicle’s ignition (provided that it was
connected correspondingly). After the
ignition was switched off, a double
beep tone reminds you that you should
remove the KeyCard before leaving
your vehicle.
To operate the set when the ignition is
switched off (KeyCard is inserted), pro-
ceed as follows:
Press “ON” after the double beep tone.
The set will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after a playback time of one hour.
switched off (KeyCard is inserted), pro-
ceed as follows:
Press “ON” after the double beep tone.
The set will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after a playback time of one hour.
2
To change the volume:
Press VOL+/VOL-.
Each time the set is switched on, it will
play with the pre-adjusted volume (VOL
FIX). You may also change the VOL
FIX setting (see chapter “DSC pro-
gramming“).
Press VOL+/VOL-.
Each time the set is switched on, it will
play with the pre-adjusted volume (VOL
FIX). You may also change the VOL
FIX setting (see chapter “DSC pro-
gramming“).
3
FM
T
Press this button to switch between the
memory banks I, II, and T (Travelstore).
As soon as this button is pressed, the
system will automatically switch to FM.
Extra function:
Store the six most powerful stations
automatically with Travelstore:
Press FM
memory banks I, II, and T (Travelstore).
As soon as this button is pressed, the
system will automatically switch to FM.
Extra function:
Store the six most powerful stations
automatically with Travelstore:
Press FM
T
until seek tuning starts in
the display.