Philips 40PFL5606D 사용자 설명서

23

EN

1 

Connect a USB storage device. 

2 

Press  . 

3 

Select [Setup] > [Update software].

4 

Follow the instructions to load a file onto 

your USB storage device. 

5 

Connect the USB storage device to your 

computer, then double-click the file. 

 

»

A Web page is launched.

6 

Follow the instructions in the Web page.

•  If the current software version matches 

the latest software update file, you do 

not need to update your TV software.

•  If the current software version is 

smaller than the latest software update 

file, download the latest software 

update file to the root directory of 

your USB device.

7 

Disconnect the USB storage device from 

the computer.

Change TV preferences

Use the preferences menu to customize your 

TV settings.

1 

Press  .

2 

Select [Setup] >[TV settings] > 

[Preferences].

3 

Select one of the following, then press OK.

•  [Menu language]: Select a menu 

language.

•  [Sleep timer]: Switch the TV to 

standby after a pre-defined duration.

•  [Location]: Optimize TV settings for 

your location - home or shop.

•  [E-sticker]: (For shop mode only) 

Switch the e-sticker on or off.

•  [Volume bar]: Display the volume bar 

when you adjust the volume. 

•  [Auto switch off]: To conserve energy, 

set the TV to switch off automatically 

after a period of inactivity.

•  [Channel information size]: Change 

the type of information that is 

displayed when you switch channels. 

•  [Universal access]: Enable or disable 

the universal access menu.

•  [Key beep]: Enable audio feedback 

when you press buttons on the 

remote control or TV.

•  [Audio out delay]: Automatically sync 

the image on your TV to the audio 

from a connected Home Theater.

•  [TV position]: Apply the best settings for 

your TV based on how it is mounted.

•  [Clock]: Display or remove the time 

from the TV, and sets clock options. 

4 

To exit, press  .

Start a TV demo

You can use demonstrations to better 

understand the features of your TV. Some 

demos are not available on certain models. 

Available demos are displayed in the menu list.

1 

While you watch TV, press  .

2 

Select [Setup] > [Watch demo], OK.

3 

Select a demo and press OK to view it.

4 

To exit, press  .

Reset the TV to factory 

settings

You can restore the default picture and sound 

settings of your TV. The channel installation 

settings remain the same.

1 

Press  .

2 

Select [Setup] > [TV settings] > [Factory 

settings], then press OK.

3 

 

»

A confirmation message is displayed.

4 

Press OK to confirm.