Philips 46PFL5606H 사용자 설명서

36

Access CAM services

1

  Insert and activate the CAM (see ‘Insert 

and activate a CAM’ on page 36). 

2

 Press   OPTIONS.

3

 Select 

[Common interface].

 

»

Applications provided by the digital TV 

service operator are displayed.

Note

 

•

This menu option is available only if the CAM is 

inserted and activated correctly.

Use Philips EasyLink

Get the most out of your HDMI-Consumer 

Electronic Control (CEC) compliant devices 

with Philips EasyLink enhanced control features. 

If your HDMI-CEC compliant devices are 

connected through HDMI, you can control 

them at the same time with your TV remote 

control.

To enable Philips EasyLink, you need to: 

•  Connect at least two HDMI-CEC 

compliant devices through HDMI

•  Configure each HDMI-CEC compliant 

device properly

•  Switch on EasyLink

Note

 

•

The EasyLink-compliant device must be switched on 

and selected as the source.

 

•

Philips does not guarantee 100% interoperability with 

all HDMI CEC devices.

Use a Conditional Access 

Module

A Conditional Access Module (CAM) is 

provided by digital TV service operators to 

decode digital TV channels.

Note

 

•

Refer to the documentation from your service 

operator on how to insert a smart card into the 

Conditional Access Module.

Insert and activate a CAM

Caution

 

•

Be sure to follow the instructions described below. 

Wrong insertion of a CAM may damage both the 

CAM and your TV.

1

  Switch off the TV and disconnect it from 

the power outlet.

2

  Following the directions printed on the 

CAM, gently insert the CAM into the 

COMMON INTERFACE at the side of the 

TV.

 

3

  Push the CAM in as far as it will go.

4

  Reconnect the TV to the power outlet.

5

  Turn on the TV and wait for the CAM to 

be activated. This may take several minutes. 

Do not remove the CAM from the slot 

when in use — this action deactivates 

digital services.

EN