Optimus CD-8250 사용자 설명서

8

Follow these steps to connect the CD
changer to your audio system and to
power.

1. Select a location for your CD

changer that is near your receiver/
amplifier and a standard AC out-
let.

Caution: Do not place the CD
changer on top of the receiver/am-
plifier or any other component that
gets hot.

Note: If you place the CD changer
near other audio components or
their wires, you might hear a hum
when you play a CD. To eliminate
the hum, move the components or
their wires.

2. Plug one end of the supplied au-

dio cable into the CD changer’s

 (left) and 

 (right) out-

put jacks, matching the red plug to
the red 

 jack and the white plug

to the white 

 jack.

3. Plug the other end of the cable

into the receiver/amplifier’s left
and right CD, AUX, or TAPE input
jacks.

Caution: Do not use the receiver/
amplifier’s PHONO inputs. Doing
so could damage the receiver/am-
plifier.

4. Plug the CD changer’s power cord

into a standard AC outlet.

Your CD changer’s remote control re-
quires two AA batteries (not supplied)
for power. We recommend alkaline
batteries, such as RadioShack Cat.
No. 23-552, for the best performance
and longest life.

• Always use fresh batteries of the

required size and recommended
type.

• Do not mix old and new batteries,

different types of batteries (stan-
dard, alkaline, or rechargeable),
or rechargeable batteries of differ-
ent capacities.

1. Pull the latch on the battery com-

partment cover and lift it off. 

42-5072.fm  Page 8  Thursday, August 12, 1999  10:55 AM