Fujitsu RX600 사용자 설명서
RX600 S4
Operating manual
79
Troubleshooting and tips
Added drive reported as defective
7.8
Added drive reported as defective
RAID controller is not configured for this drive
The drive was probably installed when the system was switched off.
Ê
Reconfigure the RAID controller for the drive using the corresponding utility.
Information is provided in the documentation for the RAID controller.
Information is provided in the documentation for the RAID controller.
or
Ê
Remove and reinstall the drive while the system is switched ON.
If the hard disk drive continues to be shown as defective, then replace it (see
).
7.9
Error message on screen
The meaning of the error message is explained in the manual for the BIOS
Setup and in the documentation for the relevant components and programs on
the PRIMERGY ServerBooks DVD.
Setup and in the documentation for the relevant components and programs on
the PRIMERGY ServerBooks DVD.