JAI CV-M77 사용자 설명서
CV-M77
C - Gain and analogue signals settings.
1 AGC switch
AS=[Param.]<CR><LF>
AS?<CR><LF>
AS?<CR><LF>
0=OFF (Manual), 1=ON (Auto)
2 Master gain level
GA=[Param.]<CR><LF>
GA?<CR><LF>
GA?<CR><LF>
0-700 Available
when
AS=0.
3 Red gain level
RG=[Param.]<CR><LF>
RG?<CR><LF>
RG?<CR><LF>
0-255 Available
when
WB=0.
4 Blue gain level
BG=[Param.]<CR><LF>
BG?<CR><LF>
BG?<CR><LF>
0-255 Available
when
WB=0.
5 AGC level
AG=[Param.]<CR><LF>
AG?<CR><LF>
AG?<CR><LF>
0-255 Available
when
AS=1.
6 White balance
WB=[Param.]<CR><LF>
WB?<CR><LF>
WB?<CR><LF>
0=Manual (Variable)
1=Auto (Variable)
2=4600K (Fixed)
3=5600K (Fixed)
1=Auto (Variable)
2=4600K (Fixed)
3=5600K (Fixed)
Sets manual gain values
(RG, BG) when changed
to 0 from other selections.
(RG, BG) when changed
to 0 from other selections.
7 Auto white balance
AW=[Param.]<CR><LF>
0=One push auto white balance
Available when WB=1.
8 Master setup level
SU=[Param.]<CR><LF>
SU?<CR><LF>
SU?<CR><LF>
33-223
(default = 128)
9 Red setup level
RS=[Param.]<CR><LF>
RS?<CR><LF>
RS?<CR><LF>
96-160
(default = 128)
10 Blue setup level
BS=[Param.]<CR><LF>
BS?<CR><LF>
BS?<CR><LF>
96-160
(default = 128)
11 White clip level
WC=[Param.]<CR><LF>
WC?<CR><LF>
WC?<CR><LF>
0-1023
12 Gamma select
GS=[Param.]<CR><LF>
GS?<CR><LF>
GS?<CR><LF>
0=1, 1=0.45, 2=0.6
D - saving and loading data in EEPROM
1
Load settings
(from camera
EEPROM)
(from camera
EEPROM)
LD=[Param.]<CR><LF>
0=FACTORY DATA AREA
1=USER DATA AREA
1=USER DATA AREA
2
Save settings
(to camera EEPROM)
(to camera EEPROM)
SA=[Param.]<CR><LF>
1=USER DATA AREA
Latest used DATA AREA
becomes default at next
power up.
becomes default at next
power up.
3
Save settings into
Factory Area.
Factory Area.
SA00=[Param.]<CR><LF> 0=FACTORY DATA AREA
Not disclosed for user.
4
EEPROM Current
Area No. Request
Area No. Request
EA?<CR><LF>
0=FACTORY DATA AREA
1=USER DATA AREA
1=USER DATA AREA
7.3.1 Receiving Data (Camera->PC)
If the function succeeds, the return value is a handle to the newly allocated memory object. If the
setting succeeds, returned is the below word from the camera.
COMPLETE<CR><LF>
Error Messages:
•
Command Error:
01 Unknown Command!!<CR><LF>
01 Unknown Command!!<CR><LF>
•
Parameter Error:
02 Bad Parameters!!<CR><LF>
02 Bad Parameters!!<CR><LF>
Response to Request Command
Example:
Request Command (PC→Camera)
Command Name
Format
Receiving Data(Camera→PC)
Remarks
Trigger Mode
TR?<CR><LF>
TR=[Param.]<CR><LF>
"Param." is same as
setting command.
- 17 -