JAI TS-2030EN 사용자 설명서

VIS-CAM System

Appendix B: J-Panel Functional & Connector Description

6.5.1 Functionality

Lane Controller RS485 signal to a second J-Panel. The Lane Controller connected to X15 pin 1 and
pin 2 or a Lane Controller signal coming from another J-Panel can be connected by means of this

connector. If no plug is inserted into the connector a build-in switch activates a 120 ? termination
resistor.

6.5.2 Connector specification

Connector type:

8 pole shielded RJ45

Connector on board:

Taitek/Kinsun ST3009S-880

Cable part:

Standard RJ45 connector

6.5.3 Connector signal specifications

Datasignal

RS485 databus signals from the Lane Controller.

6.5.4 Connector physical Interface

Table 27

Physical connector table for J-panel 2.

Pin Signal Description

Connection to

1 RS485+

RS485 databus D+

RS485-

RS485 databus D-

3 -

4 -

5 -

6 -

6.6 X5: Lane Controller Signal from J-Panel #1

Figure 73. Signal from J-panel #1

6.6.1 Functionality

Lane Controller RS485 signal from a first J-Panel. If more than one J-Panel is connected to the same
Lane Controller, the signal can be routed from J-Panel #1 X4 to J-Panel #2 X5.

6.6.2 Connector specification