IBM 21Y 사용자 설명서
Diagnostics
11
date
is the date that the diagnostic test was run
and the error recorded.
and the error recorded.
cc
is the check digit that is used to verify the
validity of the information.
validity of the information.
text message is the diagnostic message that indicates the
reason for the problem.
Text messages
The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name is the name of the function being tested
when the error occurred. This corresponds
to the function code (fff) given in the previous
list.
to the function code (fff) given in the previous
list.
Result
can be one of the following:
Passed
This result occurs when the
diagnostic test completes
without any errors.
diagnostic test completes
without any errors.
Failed
This result occurs when the
diagnostic test discovers an
error.
diagnostic test discovers an
error.
User Aborted This result occurs when you
stop the diagnostic test
before it is complete.
before it is complete.
Not Applicable This result occurs when you
specify a diagnostic test for a
device that is not present.
device that is not present.
Aborted
This result occurs when the
test could not proceed
because of the system con-
figuration.
test could not proceed
because of the system con-
figuration.
Warning
This result occurs when a
possible problem is reported
during the diagnostic test,
such as when a device that is
to be tested is not installed.
possible problem is reported
during the diagnostic test,
such as when a device that is
to be tested is not installed.
Test Specific String This is additional information that you
can use to analyze the problem.
Starting the diagnostic programs
You can press F1 while running the diagnostic programs to
obtain
obtain
Help
information. You also can press F1 from within a
help screen to obtain online documentation from which you
can select different categories. To exit
can select different categories. To exit
Help
and return to
where you left off, press Esc.
To start the diagnostic programs:
1. Turn on the server and watch the screen.
2. When the message
F2 for Diagnostics
appears,
press F2.
3. Type in the appropriate password; then, press Enter.