IBM 21Y 사용자 설명서
Installing options
49
11. Connect any needed cables to the adapter.
Attention: Route cables so that they do not block the
flow of air from the fans.
flow of air from the fans.
The following illustration shows the rerouting of the
SCSI cable. If you install a ServeRAID adapter and
intend to use it with internal drives, remove the cable
from SCSI connector on the system board and connect
it to the RAID adapter.
SCSI cable. If you install a ServeRAID adapter and
intend to use it with internal drives, remove the cable
from SCSI connector on the system board and connect
it to the RAID adapter.
Þ
1Ý
SCSI connector
12. If you have other options to install or remove, do so
now; otherwise, go to “Installing the side cover” on
page 60.
page 60.
Installing internal drives
If you add different types of drives, the system can read mul-
tiple types of media and store more data. Several types of
drives are available, such as:
tiple types of media and store more data. Several types of
drives are available, such as:
•
Diskette (installed)
•
Hard disk (installed on some models)
•
CD-ROM (installed)
•
Tape
Internal drive bays
Internal drives are installed in
bays
. The bays of the Netfin-
ity 3500-M20 are in the front of the server, as shown in the
following illustration.
following illustration.
M2
0
Ne
tfini
ty 3
500