Tandberg Data 1080P 사용자 설명서
D14640.01—MARCH 2010
15
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents
Introduction
Physical interface
Cables
Connecti to codec
Video formats
Daisy chaining
Appendices
Contact us
www.tandberg.com
TANDBERG PrecisionHD 1080p
12X/4X
12X/4X
Video output formats
NOTE:
The information on this page applies to the PrecisionHD
1080p 12X/4X camera, and describes how to set the DIP switches
1–5 to configure the camera for different video output formats.
1–5 to configure the camera for different video output formats.
DIP switch settings for video output formats
The DIP switch sets the video output format for the camera. The
DIP switch is on the underside of the camera. The default setting
is Auto. See the table to the right.
DIP switch is on the underside of the camera. The default setting
is Auto. See the table to the right.
•
Maximum resolution for HDMI is:
•
1080p60 for PrecisionHD 1080p 12X zoom
•
1080p30 for PrecisionHD 1080p 4X zoom
•
Maximum resolution for HD-SDI* is 1080p30.
Line voltage frequency
The camera will automatically detect the line voltage frequency
when it is 50 or 60 Hz. If there is a different line voltage, you
can set the video output format to a specific value (use the DIP
switches) to override the auto frequency detection.
when it is 50 or 60 Hz. If there is a different line voltage, you
can set the video output format to a specific value (use the DIP
switches) to override the auto frequency detection.
Set the PrecisionHD 1080p DIP switch (country specific setting):
•
50Hz: 00011, gives 1080p50 (720p50 for HD-SDI)
•
60Hz: 00100, gives 1080p60 (720p60 for HD-SDI)
DIP Switch table for video formats
1
2
3
4
5
HDMI
HD-SDI*
0
0
0
0
0
Auto
0
0
0
0
1
1920x1080p25
1920x1080p25
0
0
0
1
0
1920x1080p30
1920x1080p30
0
0
0
1
1
1920x1080p50
1280x720p50
0
0
1
0
0
1920x1080p60
1280x720p60
0
0
1
0
1
1280x720p25
1280x720p25
0
0
1
1
0
1280x720p30
1280x720p30
0
0
1
1
1
1280x720p50
1280x720p50
0
1
0
0
0
1280x720p60
1280x720p60
0
1
0
0
1
Software control
The DIP switch
1
0
The table shows the different settings available for the HDMI
and the HD-SDI outputs.
Auto: Camera negotiates format over HDMI. HD-SDI tracks
HDMI and defaults to 1080p30 in absence of HDMI sync.
Software: For more on the Software control setting, read about
video mode selections in the TANDBERG PrecisionHD 1080p
User Guide.
and the HD-SDI outputs.
Auto: Camera negotiates format over HDMI. HD-SDI tracks
HDMI and defaults to 1080p30 in absence of HDMI sync.
Software: For more on the Software control setting, read about
video mode selections in the TANDBERG PrecisionHD 1080p
User Guide.
* Not supported with Codec C20
Underside side of the
TANDBERG PrecisionHD
1080p camera
TANDBERG PrecisionHD
1080p camera
The PrecisionHD 1080p video formats DIP switch table
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Video formats