Lucent Technologies 8.2 사용자 설명서
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1009
Trunk Group
17
Per Call CPN Unblocking Code
For access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Time (sec) to Drop Call on No Answer
This field appears if the Group Type field is
co
or
diod
and the Outgoing Dial
Type field is
mf
, or if the Group Type field is
co
,
diod
,
fx
,
wats
, and the Country
field is
15
.
MF Tariff Free
This field appears for Access, APLT, DID, DIOD, DMI-BOS, and Tandem trunk
groups when the Incoming Dial Type field is
groups when the Incoming Dial Type field is
mf
or the Group Type field is
tie
, the
Trunk Signaling Type field is blank,
cont
, or
dis
, and the Incoming Dial Type
field is
mf
.
Outgoing ANI
If this trunk group is used for an outgoing call with ANI, the entry in this field
overrides the normal ANI. The ANI is sent exactly as administered, except for the
normal truncation to 7 digits for Russian ANI. This ANI override works both for
calls originated in DEFINITY ECS and calls tandemed through it. This field
appears for CO, DIOD, FX, and WATS trunk groups.
overrides the normal ANI. The ANI is sent exactly as administered, except for the
normal truncation to 7 digits for Russian ANI. This ANI override works both for
calls originated in DEFINITY ECS and calls tandemed through it. This field
appears for CO, DIOD, FX, and WATS trunk groups.
Valid entries
Usage
1 to 4 digit number
*, #
May be used as the first digit
Valid entries
Usage
0
–
1200
Enter the duration (in seconds) the switch should wait for
outgoing calls to be answered. If the call is not answered in the
specified number of seconds, the call drops. If this field is
outgoing calls to be answered. If the call is not answered in the
specified number of seconds, the call drops. If this field is
0
,
the timer is not set and no calls drop.
Valid entries
Usage
y/n
Enter
y
to make the switch generate an MFC Tariff-Free
Backward Signal (administered on the
Multifrequency-Signaling-Related-System- Parameters screen)
during call setup instead of the “free” signal. This aids CO
billing.
Multifrequency-Signaling-Related-System- Parameters screen)
during call setup instead of the “free” signal. This aids CO
billing.
Valid entries
Usage
1 to 15 digits
Enter the digit string to be sent in place of normal ANI.
blank
Leave this field blank to allow ANI to work normally.