Lucent Technologies 8.2 사용자 설명서
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
457
AAR and ARS Digit Conversion Table
17
Location (for ARS only)
This is a display-only field. Values other than “all” appear only if the Multiple
Locations field on the System Parameters Customer Options is y.
Locations field on the System Parameters Customer Options is y.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory
resources.
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory
resources.
Matching Pattern
Min
Max
Del
Valid display Usage
1
to
44
Defines the switch location for this ARS Digit Conversion Table.
all
Indicates that this ARS Digit Conversion Table is the default for
all port network (cabinet) locations.
all port network (cabinet) locations.
Valid entries
Usage
0
to
9
(1 to 18 digits)
Enter the number you want the switch to match to dialed
numbers. If a Prefix Digit 1 is required for 10-digit direct
distance dialing (DDD) numbers, be sure the matching
pattern begins with a 1.
numbers. If a Prefix Digit 1 is required for 10-digit direct
distance dialing (DDD) numbers, be sure the matching
pattern begins with a 1.
*, x, X
wildcard characters
Valid entries
Usage
1
to
24
Enter the minimum number of user-dialed digits the
system collects to match to this Matching Pattern.
system collects to match to this Matching Pattern.
Valid entries
Usage
Min to
28
Enter the maximum number of user-dialed digits the
system collects to match to this Matching Pattern.
system collects to match to this Matching Pattern.
Valid entries
Usage
0
to Max
Enter the number of digits you want the system to delete
from the beginning of the dialed string.
from the beginning of the dialed string.