Lucent Technologies 8.2 사용자 설명서
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
785
ISDN-BRI Trunk Circuit Pack
17
SPID
A 12-digit field containing the SPID expected by the far end. DEFINITY ECS
blocks you from changing this field unless the port is busied out or
unadministered. The only protocol supported for SPID initialization is Bellcore
(Country Code 1). Trunks will not be put in service if SPID installation is not
successful.
blocks you from changing this field unless the port is busied out or
unadministered. The only protocol supported for SPID initialization is Bellcore
(Country Code 1). Trunks will not be put in service if SPID installation is not
successful.
Endpt ID
A 2-digit field containing the Endpoint Identifier expected by the far end.
DEFINITY ECS blocks you from changing this field unless the port is busied out
or unadministered.
DEFINITY ECS blocks you from changing this field unless the port is busied out
or unadministered.
Max NCA TSC
Port
This is a display-only field. It shows the port number to which parameters
administered on the row apply.
administered on the row apply.
Directory Number
These 10-digit fields contain the directory numbers assigned to the interface,
which it views as being allocated to 2 separate endpoints.
which it views as being allocated to 2 separate endpoints.
Valid entries
Usage
Any string of 1 to 12
digits
digits
Leading zeroes considered significant and not
ignored
ignored
Valid entries
Usage
00
to
62
Leading zeroes considered significant and not ignored.
Valid entries
Usage
0
through
63
.
This 2-digit field gives the maximum number of
Non-Call-Associated Temporary Signaling Connections
allowed on this BRI D-channel. This field’s function is the
same as the field with the same name on the Signaling Group
screen.
Non-Call-Associated Temporary Signaling Connections
allowed on this BRI D-channel. This field’s function is the
same as the field with the same name on the Signaling Group
screen.
Valid entries
Usage
Any string of
1 to 10 digits
1 to 10 digits
These fields must be administered in pairs. That is, if you enter a
value in one field, you must enter a value in the other.
value in one field, you must enter a value in the other.