Uniden GC45W 사용자 설명서
8
6. Connect one end of an AC adapter to the camera’s power pigtail and plug
the other end into a 120 volt AC (standard indoor) power outlet (if
necessary, connect
the extension cord to
the camera’s pigtail
and connect the AC
adapter to the
extension cord).
Be sure the power
plug and the
connector are tightly
twisted together to
avoid water leaking
in.
necessary, connect
the extension cord to
the camera’s pigtail
and connect the AC
adapter to the
extension cord).
Be sure the power
plug and the
connector are tightly
twisted together to
avoid water leaking
in.
7. Make sure the
Power
status light turns
on. If it doesn’t, try
reconnecting the AC
adapter, and make sure the power outlet isn’t controlled by a wall switch.
on. If it doesn’t, try
reconnecting the AC
adapter, and make sure the power outlet isn’t controlled by a wall switch.
1
2
4
3
Loosen the
wingnut to
unlock the
mounting
post.
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
Tighten the brace against
the camera to
secure it
in place.
Antenna
Power/
Pair button