Lucent Technologies Release 6 사용자 설명서
Install and Connect Cabinets
Page 1-1
Unpack and Inspect Cabinets
1
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
1
1
Install and Connect Cabinets
This chapter discusses installation of Multi-Carrier Cabinets only. For information
on Single-Carrier Cabinets, refer to
on Single-Carrier Cabinets, refer to
DEFINITY Enterprise Communications Server
Release 5 Installation and Test for Single-Carrier Cabinets
.
Floor plans and equipment layouts for typical system installations are provided in
DEFINITY Enterprise Communications Server Release 6 System Description
Pocket Reference
Pocket Reference
.
Unpack and Inspect Cabinets
Perform these steps for all cabinets.
!
DANGER:
A cabinet may weigh as much as 800 lbs (363 kg) and may be top heavy.
Use extreme caution.
Use extreme caution.
1. Check the status of the SHOCKWATCH and/or TILTWATCH indicators on
the container. If the container has been shaken or tilted beyond
specifications, the indicators are red, indicating potential damage. Report
any damage according to local shipping instructions.
specifications, the indicators are red, indicating potential damage. Report
any damage according to local shipping instructions.
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2. Unpack the cabinet and remove all packing material.
3. Move the cabinets into their proper positions.
4. Do not adjust the leveling feet at this time.