Panasonic WV-CP500 사용자 설명서

Set the detection areas

Set the detection areas for motion detection and the detection of appearance/disappearance of stationary objects.
Up to 2 detection areas can be set.
Follow the procedure below.

Step 1

Move the cursor to "AREA" and select "SETUP", and then press the setting button.

→ The "AREA" screen appears.

Step 2

Move the cursor onto the number to select the area number using the right or left button.

Step 3

Move the cursor to "POSITION" and press the setting button.

Step 4

Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.

Note:

• The area corresponding to the selected number will be displayed in a green frame, while the other set areas are shown in a

white frame.

Step 5

Use the up, down, right, and left buttons to determine the right lower position of the area to be set and press the setting button.

→ The asterisk mark "*" will be displayed after the number and the area setting will be saved.

Note:

• To delete the area, select the area number and press the setting button after moving the cursor to "DEL".
• To change the settings of the area, select the area number and repeat from step 3.

"OBJECT DET" screen

Area setting screen

"MOTION DET" screen

**MOTION DET**(1)

MOTION OFF

LOITERING OFF

DIRECTION OFF
AREA SETUP

SENSITIVITY

RET TOP END

**AREA 1 /2**(1)
POSITION PUSH SW
UPPER LEFT

DEL

RET TOP END

**OBJECT DET**(1)

REMOVAL AND LEFT BEHIND
DURATION TIME 10s

AREA SETUP

SENSITIVITY

RET TOP END